Physico-chemical features of the synthesis of mullite in mixtures of quartz-pyrophyllite rock with a fluoride-forming component

Результат исследований: Материалы для журналаСтатья

1 Цитирования (Scopus)

Аннотация

It is established that the use of an ammonium fluoride treatment on quartz-pyrophyllite rock (45% pyrophyllite and 53% quartz) at 650°C changes the traditional mechanism by which mullite is synthesized; it is formed not from metapyrophyllite but from fluoridated pyrophyllite, with the formation of aluminum trifluoride and topaz being intermediate stages of the synthesis process. The optimum ratio of quartzpyrophyllite rock to ammonium hydrodifluoride is 1:1.6, which at 1300°C increases the yield of acicular mullite (with particles 20 - 30 μm long and 3 - 5 μm in cross section) from 12 to 68 wt.%. The content of residual quartz in the mullite is no greater than 15 - 18 wt.%.

Язык оригиналаАнглийский
Страницы (с-по)131-136
Число страниц6
ЖурналRefractories and Industrial Ceramics
Том55
Номер выпуска2
DOI
СостояниеОпубликовано - 2014

ASJC Scopus subject areas

  • Ceramics and Composites
  • Materials Chemistry

Fingerprint Подробные сведения о темах исследования «Physico-chemical features of the synthesis of mullite in mixtures of quartz-pyrophyllite rock with a fluoride-forming component». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать