Oriented microtexturing on the surface of high-speed steel cutting tool

Результат исследований: Материалы для журналаСтатья

1 цитирование (Scopus)

Выдержка

Microtexturing the metal cutting tool surfaces is a novel technique intended for enhancing the workability of these tools. The microtexturing is used in machining the titanium alloys for air-space applications for reducing the adhesion wear of metal cutting blades. This paper is focused on forming the microtextured dotted, banded and overlapped areas on the surfaces of high-speed steel samples. The treated areas have been examined using laser scanning microscopy for the microtexture pattern and roughness. It has been shown that the microtextured surfaces obtained on the high-speed steel samples were free of cracks. Surface pattern and roughness of all three microtextured areas have been examined and analyzed.

Язык оригиналаАнглийский
Номер статьи020057
ЖурналAIP Conference Proceedings
Том1783
DOI
СостояниеОпубликовано - 10 ноя 2016
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 - Tomsk, Российская Федерация
Продолжительность: 19 сен 201623 сен 2016

Отпечаток

high speed
steels
metal cutting
roughness
airspace
titanium alloys
blades
machining
adhesion
cracks
microscopy
scanning
lasers

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать

Oriented microtexturing on the surface of high-speed steel cutting tool. / Filippov, Andrey Vladimirovich; Tarasov, S. Yu; Podgornyh, O. A.; Shamarin, N. N.; Filippova, E. O.

В: AIP Conference Proceedings, Том 1783, 020057, 10.11.2016.

Результат исследований: Материалы для журналаСтатья

@article{0d6494cbacde49cb993e32f4d030dfd4,
title = "Oriented microtexturing on the surface of high-speed steel cutting tool",
abstract = "Microtexturing the metal cutting tool surfaces is a novel technique intended for enhancing the workability of these tools. The microtexturing is used in machining the titanium alloys for air-space applications for reducing the adhesion wear of metal cutting blades. This paper is focused on forming the microtextured dotted, banded and overlapped areas on the surfaces of high-speed steel samples. The treated areas have been examined using laser scanning microscopy for the microtexture pattern and roughness. It has been shown that the microtextured surfaces obtained on the high-speed steel samples were free of cracks. Surface pattern and roughness of all three microtextured areas have been examined and analyzed.",
author = "Filippov, {Andrey Vladimirovich} and Tarasov, {S. Yu} and Podgornyh, {O. A.} and Shamarin, {N. N.} and Filippova, {E. O.}",
year = "2016",
month = "11",
day = "10",
doi = "10.1063/1.4966350",
language = "English",
volume = "1783",
journal = "AIP Conference Proceedings",
issn = "0094-243X",
publisher = "American Institute of Physics Publising LLC",

}

TY - JOUR

T1 - Oriented microtexturing on the surface of high-speed steel cutting tool

AU - Filippov, Andrey Vladimirovich

AU - Tarasov, S. Yu

AU - Podgornyh, O. A.

AU - Shamarin, N. N.

AU - Filippova, E. O.

PY - 2016/11/10

Y1 - 2016/11/10

N2 - Microtexturing the metal cutting tool surfaces is a novel technique intended for enhancing the workability of these tools. The microtexturing is used in machining the titanium alloys for air-space applications for reducing the adhesion wear of metal cutting blades. This paper is focused on forming the microtextured dotted, banded and overlapped areas on the surfaces of high-speed steel samples. The treated areas have been examined using laser scanning microscopy for the microtexture pattern and roughness. It has been shown that the microtextured surfaces obtained on the high-speed steel samples were free of cracks. Surface pattern and roughness of all three microtextured areas have been examined and analyzed.

AB - Microtexturing the metal cutting tool surfaces is a novel technique intended for enhancing the workability of these tools. The microtexturing is used in machining the titanium alloys for air-space applications for reducing the adhesion wear of metal cutting blades. This paper is focused on forming the microtextured dotted, banded and overlapped areas on the surfaces of high-speed steel samples. The treated areas have been examined using laser scanning microscopy for the microtexture pattern and roughness. It has been shown that the microtextured surfaces obtained on the high-speed steel samples were free of cracks. Surface pattern and roughness of all three microtextured areas have been examined and analyzed.

UR - http://www.scopus.com/inward/record.url?scp=85005949338&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85005949338&partnerID=8YFLogxK

U2 - 10.1063/1.4966350

DO - 10.1063/1.4966350

M3 - Article

AN - SCOPUS:85005949338

VL - 1783

JO - AIP Conference Proceedings

JF - AIP Conference Proceedings

SN - 0094-243X

M1 - 020057

ER -