On the Problem of Wear Resistant Coatings Separation from Tools and Machine Elements

S. I. Petrushin, R. H. Gubaidulina, S. V. Gruby, A. V. Likholat

Результат исследований: Материалы для журнала

7 Цитирования (Scopus)

Аннотация

The article considers separation of wear resistant coatings of tool and engineering materials which arises both during coating fabrication and use of the product. The cause of this phenomenon is assumed to be related to thermal residual stresses generating on the coating- substrate border. These stresses have been analyzed and methods are provided to calculate it after produced composite material is cooled down from the temperature of coating synthesis to the ambient temperature. A no-fracture condition has been stated in relation to coating- substrate thicknesses, temperature differences and physical and mechanical properties of combined materials. The issue of intermediate layer incorporation with pre-set parameters has been discussed. A co-effect of thermal residual and functional stresses on the strength of the boundary layer has been considered when heating, tension and compression of a product with wear resistant coating. Conclusions have been made, as well as recommendations to improve fracture strength of products with thin wear resistant coatings.

Язык оригиналаАнглийский
Номер статьи012048
ЖурналIOP Conference Series: Materials Science and Engineering
Том91
Номер выпуска1
DOI
СостояниеОпубликовано - 14 сен 2015
Событие6th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering - Yurga, Российская Федерация
Продолжительность: 21 мая 201523 мая 2015

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Подробные сведения о темах исследования «On the Problem of Wear Resistant Coatings Separation from Tools and Machine Elements». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать