Obtaining and characterisation of high entropy alloys used for medical applications

V. Geantǎ, I. Voiculescu, R. Ştefǎnoiu, M. Codescu, H. Kelemen, G. Pavel, A. Vlǎdescu, V. A. Sandu

Результат исследований: Материалы для журнала

1 Цитирования (Scopus)

Аннотация

The experimental CrFeMoNbTaTiZr alloys were designed based on the extremely low bio-toxicity of the chemical elements. They are currently used as a basis for alloying of classical alloys used in medical device manufacturing. From this alloying system, were obtained in a Vacuum Arc Remelting (VAR) equipment six alloys: CrFeMoNbTaTi, CrFeMoNbTaZr, CrFeMoTaTiZr, CrFeTaNbTiZr, CrTaNbTiZrMo and FeTaNbTiZrMo. The microstructural analysis of the obtained alloys have been performed by optical and SEM microscopy. The microhardness tests show results in the range of 575-1337 HV0.2/10. In order to improve the mechanical properties heat treatment procedures have been applied.

Язык оригиналаАнглийский
Номер статьи012023
ЖурналIOP Conference Series: Materials Science and Engineering
Том572
Номер выпуска1
DOI
СостояниеОпубликовано - 2 авг 2019
Опубликовано для внешнего пользованияДа
Событие2019 International Conference on Innovative Research, ICIR EUROINVENT 2019 - Iasi, Румыния
Продолжительность: 16 мая 201917 мая 2019

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Подробные сведения о темах исследования «Obtaining and characterisation of high entropy alloys used for medical applications». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать