Numerical simulation of synthesis gas incineration

Alexander Vladimirovich Kazakov, Sergei Alexandrovich Khaustov, R. B. Tabakaev, Y. A. Belousova

Результат исследований: Материалы для журналарецензирование

3 Цитирования (Scopus)


The authors have analysed the expediency of the suggested low-grade fuels application method. Thermal processing of solid raw materials in the gaseous fuel, called synthesis gas, is investigated. The technical challenges concerning the applicability of the existing gas equipment developed and extensively tested exclusively for natural gas were considered. For this purpose computer simulation of three-dimensional syngas-incinerating flame dynamics was performed by means of the ANSYS Multiphysics engineering software. The subjects of studying were: a three-dimensional aerodynamic flame structure, heat-release and temperature fields, a set of combustion properties: a flare range and the concentration distribution of burnout reagents. The obtained results were presented in the form of a time-averaged pathlines with color indexing. The obtained results can be used for qualitative and quantitative evaluation of complex multicomponent gas incineration singularities.

Язык оригиналаАнглийский
Номер статьи012110
ЖурналIOP Conference Series: Materials Science and Engineering
Номер выпуска1
СостояниеОпубликовано - 2 июн 2016
СобытиеInternational Conference on Mechanical Engineering, Automation and Control Systems 2015, MEACS 2015 - Tomsk, Российская Федерация
Продолжительность: 1 дек 20154 дек 2015

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Подробные сведения о темах исследования «Numerical simulation of synthesis gas incineration». Вместе они формируют уникальный семантический отпечаток (fingerprint).