Nonisothermal desorption of the LiBr aqueous salt solution in minichannels

S. Y. Misyura, V. S. Morozov

Результат исследований: Материалы для журнала

Выдержка

This work is devoted the research for two (three)-phase flows of LiBr water solution in minichannels with different heat flux and wall thicknesses. Six flow patterns have been observed: a bubble flow, plug flow, laminar and oscillating laminar flow, mist flow, and flow locking. The physical solution properties and the equilibrium conditions change in time. The desorption rate depends not only on the heat flow and speed ratio of vapor to liquid, but also on the total area of the interface (liquid-vapor). The third phase (solid crystal hydrates) are formed under high heat fluxes and in the presence of boiling crisis. A variation in the wall thickness leads to a change in the desorption mode. With increasing wall thickness the boiling crisis is realized at higher heat fluxes.

Язык оригиналаАнглийский
Номер статьи01033
ЖурналMATEC Web of Conferences
Том37
DOI
СостояниеОпубликовано - 22 дек 2015
Опубликовано для внешнего пользованияДа
СобытиеSmart Grids 2015 - Tomsk, Российская Федерация
Продолжительность: 28 сен 20152 окт 2015

Отпечаток

Heat flux
Desorption
Salts
Laminar flow
Boiling liquids
Vapors
Oscillating flow
Flow of water
Liquids
Fog
Hydrates
Flow patterns
Heat transfer
Crystals

ASJC Scopus subject areas

  • Chemistry(all)
  • Materials Science(all)
  • Engineering(all)

Цитировать

Nonisothermal desorption of the LiBr aqueous salt solution in minichannels. / Misyura, S. Y.; Morozov, V. S.

В: MATEC Web of Conferences, Том 37, 01033, 22.12.2015.

Результат исследований: Материалы для журнала

@article{92d017c2eacc463287d133994eb2bf0b,
title = "Nonisothermal desorption of the LiBr aqueous salt solution in minichannels",
abstract = "This work is devoted the research for two (three)-phase flows of LiBr water solution in minichannels with different heat flux and wall thicknesses. Six flow patterns have been observed: a bubble flow, plug flow, laminar and oscillating laminar flow, mist flow, and flow locking. The physical solution properties and the equilibrium conditions change in time. The desorption rate depends not only on the heat flow and speed ratio of vapor to liquid, but also on the total area of the interface (liquid-vapor). The third phase (solid crystal hydrates) are formed under high heat fluxes and in the presence of boiling crisis. A variation in the wall thickness leads to a change in the desorption mode. With increasing wall thickness the boiling crisis is realized at higher heat fluxes.",
author = "Misyura, {S. Y.} and Morozov, {V. S.}",
year = "2015",
month = "12",
day = "22",
doi = "10.1051/matecconf/20153701033",
language = "English",
volume = "37",
journal = "MATEC Web of Conferences",
issn = "2261-236X",
publisher = "EDP Sciences",

}

TY - JOUR

T1 - Nonisothermal desorption of the LiBr aqueous salt solution in minichannels

AU - Misyura, S. Y.

AU - Morozov, V. S.

PY - 2015/12/22

Y1 - 2015/12/22

N2 - This work is devoted the research for two (three)-phase flows of LiBr water solution in minichannels with different heat flux and wall thicknesses. Six flow patterns have been observed: a bubble flow, plug flow, laminar and oscillating laminar flow, mist flow, and flow locking. The physical solution properties and the equilibrium conditions change in time. The desorption rate depends not only on the heat flow and speed ratio of vapor to liquid, but also on the total area of the interface (liquid-vapor). The third phase (solid crystal hydrates) are formed under high heat fluxes and in the presence of boiling crisis. A variation in the wall thickness leads to a change in the desorption mode. With increasing wall thickness the boiling crisis is realized at higher heat fluxes.

AB - This work is devoted the research for two (three)-phase flows of LiBr water solution in minichannels with different heat flux and wall thicknesses. Six flow patterns have been observed: a bubble flow, plug flow, laminar and oscillating laminar flow, mist flow, and flow locking. The physical solution properties and the equilibrium conditions change in time. The desorption rate depends not only on the heat flow and speed ratio of vapor to liquid, but also on the total area of the interface (liquid-vapor). The third phase (solid crystal hydrates) are formed under high heat fluxes and in the presence of boiling crisis. A variation in the wall thickness leads to a change in the desorption mode. With increasing wall thickness the boiling crisis is realized at higher heat fluxes.

UR - http://www.scopus.com/inward/record.url?scp=84976488581&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84976488581&partnerID=8YFLogxK

U2 - 10.1051/matecconf/20153701033

DO - 10.1051/matecconf/20153701033

M3 - Conference article

AN - SCOPUS:84976488581

VL - 37

JO - MATEC Web of Conferences

JF - MATEC Web of Conferences

SN - 2261-236X

M1 - 01033

ER -