Modification of metals and hard coatings using vacuum-arc metal ion implantation

Yurii P. Sharkeev, Boris Petrovich Gritsenko, Sergei V. Fortuna, Anthony J. Perry

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

1 Цитирования (Scopus)

Аннотация

The improvement of service properties after metal ion implantation is demonstrated using real-world examples. The improvement is caused by the formation of specific structural-phase states in the implanted zone (IZ). The formation of defect structures beyond the IZ, called the long-range effect, is found in metals of high plasticity and low yield strength and in high strength materials such as TiN. Experimental results from TiN coatings are presented together with a model explaining the formation of the defect structure beyond the IZ. The residual stress in TiN made by PVD is modified after implantation but with no effect on the grain structure, whereas the residual stress is not changed in CVD TiN but the growth of fine grains is observed within the original grains.

Язык оригиналаАнглийский
Название основной публикацииProceedings of the International Conference on Ion Implantation Technology
Место публикацииPiscataway, NJ, United States
ИздательIEEE
Страницы873-876
Число страниц4
Том2
ISBN (печатное издание)078034538X
СостояниеОпубликовано - 1999
СобытиеProceedings of the 1998 International Conference on 'Ion Implantation Technology' Proceedings (IIT'98) - Kyoto, Jpn
Продолжительность: 22 июн 199826 июн 1998

Другое

ДругоеProceedings of the 1998 International Conference on 'Ion Implantation Technology' Proceedings (IIT'98)
ГородKyoto, Jpn
Период22.6.9826.6.98

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Подробные сведения о темах исследования «Modification of metals and hard coatings using vacuum-arc metal ion implantation». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Sharkeev, Y. P., Gritsenko, B. P., Fortuna, S. V., & Perry, A. J. (1999). Modification of metals and hard coatings using vacuum-arc metal ion implantation. В Proceedings of the International Conference on Ion Implantation Technology (Том 2, стр. 873-876). IEEE.