Modelling the physical properties of glasslike carbon foams

M. Letellier, J. Macutkevic, D. Bychanok, P. Kuzhir, C. Delgado-Sanchez, H. Naguib, S. Ghaffari Mosanenzadeh, V. Fierro, A. Celzard

Результат исследований: Материалы для журналарецензирование

5 Цитирования (Scopus)


In this work, model alveolar materials - carbon cellular and/or carbon reticulated foams - were produced in order to study and to model their physical properties. It was shown that very different morphologies could be obtained whereas the constituting vitreous carbon from which they were made remained exactly the same. Doing so, the physical properties of these foams were expected to depend neither on the composition nor on the carbonaceous texture but only on the porous structure, which could be tuned for the first time for having a constant pore size in a range of porosities, or a range of pore sizes at fixed porosity. The physical properties were then investigated through mechanical, acoustic, thermal and electromagnetic measurements. The results demonstrate the roles played by bulk density and cell size on all physical properties. Whereas some of the latter strongly depend on porosity and/or pore size, others are independent of pore size. It is expected that these results apply to many other kinds of rigid foams used in a broad range of different applications. The present results therefore open the route to their optimisation.

Язык оригиналаАнглийский
Номер статьи012014
ЖурналJournal of Physics: Conference Series
Номер выпуска1
СостояниеОпубликовано - 29 авг 2017
Опубликовано для внешнего пользованияДа
Событие5th International Conference New Achievements in Materials and Environmental Science, NAMES 2016 - Nancy, Франция
Продолжительность: 7 ноя 20169 ноя 2016

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Modelling the physical properties of glasslike carbon foams». Вместе они формируют уникальный семантический отпечаток (fingerprint).