Modal analysis of additive manufactured carbon fiber reinforced polymer composite framework: Experiment and modeling

N. V. Dryginin, V. A. Krasnoveikin, Andrey Vladimirovich Filippov, S. Yu Tarasov, V. E. Rubtsov

Результат исследований: Материалы для журналаСтатья

Выдержка

Additive manufacturing by 3D printing is the most advanced and promising trend for making the multicomponent composites. Polymer-based carbon fiber reinforced composites demonstrate high mechanical properties combined with low weight characteristics of the component. This paper shows the results of 3D modeling and experimental modal analysis on a polymer composite framework obtained using additive manufacturing. By the example of three oscillation modes it was shown the agreement between the results of modeling and experimental modal analysis with the use of laser Doppler vibrometry.

Язык оригиналаАнглийский
Номер статьи020046
ЖурналAIP Conference Proceedings
Том1783
DOI
СостояниеОпубликовано - 10 ноя 2016
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 - Tomsk, Российская Федерация
Продолжительность: 19 сен 201623 сен 2016

Отпечаток

carbon fibers
composite materials
polymers
manufacturing
low weight
printing
mechanical properties
trends
oscillations
lasers

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать

Modal analysis of additive manufactured carbon fiber reinforced polymer composite framework : Experiment and modeling. / Dryginin, N. V.; Krasnoveikin, V. A.; Filippov, Andrey Vladimirovich; Tarasov, S. Yu; Rubtsov, V. E.

В: AIP Conference Proceedings, Том 1783, 020046, 10.11.2016.

Результат исследований: Материалы для журналаСтатья

@article{1dfe6d723a8c4cadb39ebbdea21d59d3,
title = "Modal analysis of additive manufactured carbon fiber reinforced polymer composite framework: Experiment and modeling",
abstract = "Additive manufacturing by 3D printing is the most advanced and promising trend for making the multicomponent composites. Polymer-based carbon fiber reinforced composites demonstrate high mechanical properties combined with low weight characteristics of the component. This paper shows the results of 3D modeling and experimental modal analysis on a polymer composite framework obtained using additive manufacturing. By the example of three oscillation modes it was shown the agreement between the results of modeling and experimental modal analysis with the use of laser Doppler vibrometry.",
author = "Dryginin, {N. V.} and Krasnoveikin, {V. A.} and Filippov, {Andrey Vladimirovich} and Tarasov, {S. Yu} and Rubtsov, {V. E.}",
year = "2016",
month = "11",
day = "10",
doi = "10.1063/1.4966339",
language = "English",
volume = "1783",
journal = "AIP Conference Proceedings",
issn = "0094-243X",
publisher = "American Institute of Physics Publising LLC",

}

TY - JOUR

T1 - Modal analysis of additive manufactured carbon fiber reinforced polymer composite framework

T2 - Experiment and modeling

AU - Dryginin, N. V.

AU - Krasnoveikin, V. A.

AU - Filippov, Andrey Vladimirovich

AU - Tarasov, S. Yu

AU - Rubtsov, V. E.

PY - 2016/11/10

Y1 - 2016/11/10

N2 - Additive manufacturing by 3D printing is the most advanced and promising trend for making the multicomponent composites. Polymer-based carbon fiber reinforced composites demonstrate high mechanical properties combined with low weight characteristics of the component. This paper shows the results of 3D modeling and experimental modal analysis on a polymer composite framework obtained using additive manufacturing. By the example of three oscillation modes it was shown the agreement between the results of modeling and experimental modal analysis with the use of laser Doppler vibrometry.

AB - Additive manufacturing by 3D printing is the most advanced and promising trend for making the multicomponent composites. Polymer-based carbon fiber reinforced composites demonstrate high mechanical properties combined with low weight characteristics of the component. This paper shows the results of 3D modeling and experimental modal analysis on a polymer composite framework obtained using additive manufacturing. By the example of three oscillation modes it was shown the agreement between the results of modeling and experimental modal analysis with the use of laser Doppler vibrometry.

UR - http://www.scopus.com/inward/record.url?scp=85006065012&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85006065012&partnerID=8YFLogxK

U2 - 10.1063/1.4966339

DO - 10.1063/1.4966339

M3 - Article

AN - SCOPUS:85006065012

VL - 1783

JO - AIP Conference Proceedings

JF - AIP Conference Proceedings

SN - 0094-243X

M1 - 020046

ER -