Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system

Yu D. Korolev, O. B. Frants, V. G. Geyman, N. V. Landl, I. A. Shemyakin, K. Frank, R. Bischoff, J. Pankert, K. Bergmann

    Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

    2 Цитирования (Scopus)

    Выдержка

    A great variety of trigger systems for pseudospark switches have been described in current publications. In most cases the trigger units are mounted at the grounded cathode. However, in some cases, a specific requirement for triggering is required, namely, that the trigger unit be located at the cathode. Direct application of previous experience, as applied to these cases, leads to a rather intricate design for both the mechanical parts of the trigger unit and the electric circuit. This paper proposes a simple triggering method for such conditions.

    Язык оригиналаАнглийский
    Название основной публикацииConference Record of the International Power Modulator Symposium and High Voltage Workshop
    Страницы588-591
    Число страниц4
    СостояниеОпубликовано - 2004
    Событие2004 IEEE International Power Modulator Conference: 26th International Power Modulator Symposium and 2004 High Voltage Workshop - San Francisco, CA, Соединенные Штаты Америки
    Продолжительность: 23 мая 200426 мая 2004

    Другое

    Другое2004 IEEE International Power Modulator Conference: 26th International Power Modulator Symposium and 2004 High Voltage Workshop
    СтранаСоединенные Штаты Америки
    ГородSan Francisco, CA
    Период23.5.0426.5.04

    Отпечаток

    Cathodes
    Switches
    Electrodes
    Networks (circuits)

    ASJC Scopus subject areas

    • Engineering(all)

    Цитировать

    Korolev, Y. D., Frants, O. B., Geyman, V. G., Landl, N. V., Shemyakin, I. A., Frank, K., ... Bergmann, K. (2004). Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system. В Conference Record of the International Power Modulator Symposium and High Voltage Workshop (стр. 588-591)

    Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system. / Korolev, Yu D.; Frants, O. B.; Geyman, V. G.; Landl, N. V.; Shemyakin, I. A.; Frank, K.; Bischoff, R.; Pankert, J.; Bergmann, K.

    Conference Record of the International Power Modulator Symposium and High Voltage Workshop. 2004. стр. 588-591.

    Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

    Korolev, YD, Frants, OB, Geyman, VG, Landl, NV, Shemyakin, IA, Frank, K, Bischoff, R, Pankert, J & Bergmann, K 2004, Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system. в Conference Record of the International Power Modulator Symposium and High Voltage Workshop. стр. 588-591, San Francisco, CA, Соединенные Штаты Америки, 23.5.04.
    Korolev YD, Frants OB, Geyman VG, Landl NV, Shemyakin IA, Frank K и соавт. Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system. В Conference Record of the International Power Modulator Symposium and High Voltage Workshop. 2004. стр. 588-591
    Korolev, Yu D. ; Frants, O. B. ; Geyman, V. G. ; Landl, N. V. ; Shemyakin, I. A. ; Frank, K. ; Bischoff, R. ; Pankert, J. ; Bergmann, K. / Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system. Conference Record of the International Power Modulator Symposium and High Voltage Workshop. 2004. стр. 588-591
    @inproceedings{18182219b9b5447e8c352a1d9e5b1f34,
    title = "Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system",
    abstract = "A great variety of trigger systems for pseudospark switches have been described in current publications. In most cases the trigger units are mounted at the grounded cathode. However, in some cases, a specific requirement for triggering is required, namely, that the trigger unit be located at the cathode. Direct application of previous experience, as applied to these cases, leads to a rather intricate design for both the mechanical parts of the trigger unit and the electric circuit. This paper proposes a simple triggering method for such conditions.",
    author = "Korolev, {Yu D.} and Frants, {O. B.} and Geyman, {V. G.} and Landl, {N. V.} and Shemyakin, {I. A.} and K. Frank and R. Bischoff and J. Pankert and K. Bergmann",
    year = "2004",
    language = "English",
    pages = "588--591",
    booktitle = "Conference Record of the International Power Modulator Symposium and High Voltage Workshop",

    }

    TY - GEN

    T1 - Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system

    AU - Korolev, Yu D.

    AU - Frants, O. B.

    AU - Geyman, V. G.

    AU - Landl, N. V.

    AU - Shemyakin, I. A.

    AU - Frank, K.

    AU - Bischoff, R.

    AU - Pankert, J.

    AU - Bergmann, K.

    PY - 2004

    Y1 - 2004

    N2 - A great variety of trigger systems for pseudospark switches have been described in current publications. In most cases the trigger units are mounted at the grounded cathode. However, in some cases, a specific requirement for triggering is required, namely, that the trigger unit be located at the cathode. Direct application of previous experience, as applied to these cases, leads to a rather intricate design for both the mechanical parts of the trigger unit and the electric circuit. This paper proposes a simple triggering method for such conditions.

    AB - A great variety of trigger systems for pseudospark switches have been described in current publications. In most cases the trigger units are mounted at the grounded cathode. However, in some cases, a specific requirement for triggering is required, namely, that the trigger unit be located at the cathode. Direct application of previous experience, as applied to these cases, leads to a rather intricate design for both the mechanical parts of the trigger unit and the electric circuit. This paper proposes a simple triggering method for such conditions.

    UR - http://www.scopus.com/inward/record.url?scp=22244431894&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=22244431894&partnerID=8YFLogxK

    M3 - Conference contribution

    AN - SCOPUS:22244431894

    SP - 588

    EP - 591

    BT - Conference Record of the International Power Modulator Symposium and High Voltage Workshop

    ER -