Metal-supported solid oxide fuel cell with YSZ electrolyte fabricated by vacuum plasma method

N. S. Sochugov, A. A. Soloviev, A. V. Shipilova, A. I. Kirdyashkin, A. S. Maznoy

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

This paper describes a fabrication and investigation of a metal-supported solid oxide fuel cell (SOFC) with magnetron-sputtered Ni anode and ZrO2:Y2O3 (YSZ) electrolyte. As a metal supports were used a porous Ni3Al samples prepared by self-propagating high-temperature synthesis (SHS). Deposition of the electrolyte films was performed on the porous Ni3Al substrates which preliminary were coated by a Ni leveling and gas-diffusion layer. The surface and cross-section microstructure of Ni3Al substrates was investigated. The cells were also characterized by means of i-V characteristics and impedance spectroscopy at an operating temperature of 600-800°C.
Язык оригиналаАнглийский
Название основной публикацииEFC 2011 - Proceedings of the 4th European Fuel Cell Piero Lunghi Conference and Exhibition
Страницы87-88
Число страниц2
СостояниеОпубликовано - 1 янв 2011

Fingerprint Подробные сведения о темах исследования «Metal-supported solid oxide fuel cell with YSZ electrolyte fabricated by vacuum plasma method». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Sochugov, N. S., Soloviev, A. A., Shipilova, A. V., Kirdyashkin, A. I., & Maznoy, A. S. (2011). Metal-supported solid oxide fuel cell with YSZ electrolyte fabricated by vacuum plasma method. В EFC 2011 - Proceedings of the 4th European Fuel Cell Piero Lunghi Conference and Exhibition (стр. 87-88)