Melting of corrosion-resisting steels using air in bath agitation at the end of oxygen blowing

Rinat Akramovich Gizatulin, D. V. Valuev, A. V. Valueva, Ch V. Yedesheva

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

1 Цитирования (Scopus)

Аннотация

A number of metallurgical plants employ ladle stirring with argon at the end of oxygen blowing during the melting process of corrosion-resisting steels [1, 2]. At the same time, the scarcity and relatively high cost of argon, its low pressure in a shop air pipeline restrain most plants from using argon for corrosion-resisting steel production. Compressed air was used instead of argon to intensify the process of decarbonizing when chromium-nickel stainless steels were made with a 40-ton electric arc furnace at the Kuznetsk Metallurgical Plant.

Язык оригиналаАнглийский
Название основной публикацииIOP Conference Series: Materials Science and Engineering
ИздательInstitute of Physics Publishing
Том66
Издание1
DOI
СостояниеОпубликовано - 2014
Событие20th International Conference for Students and Young Scientists: Modern Techniques and Technologies, MTT 2014 - Tomsk, Российская Федерация
Продолжительность: 14 апр 201418 апр 2014

Другое

Другое20th International Conference for Students and Young Scientists: Modern Techniques and Technologies, MTT 2014
СтранаРоссийская Федерация
ГородTomsk
Период14.4.1418.4.14

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Fingerprint Подробные сведения о темах исследования «Melting of corrosion-resisting steels using air in bath agitation at the end of oxygen blowing». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать