Mechanism of the directed destruction of metals by cutting

Konstantin V. Bannov, Alexander V. Gradoboev, Valery S. Matveev

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

1 цитирование (Scopus)

Выдержка

In the given article, on the basis of the standard hydrodynamic representations, the physical model of the directed destruction of metals by cutting is offered. Process of cutting of metals is considered as process of the directed destruction, i.e. process of deep plastic deformation of metal always led up to destruction on surfaces of the cutting, defined by process kinematics. The design of the metal-cutting tool for part removal liquid-alloy (in the form of a ridge) from an internal contact zone of shaving is presented. Physicomechanical properties of ridges both their geometrical form and the sizes testify that they are formed of a stream of the melted metal owing to fast cooling in environment. Identity of mechanical properties of ridges and the modified layer on a tool surface of shaving testify to identity of conditions of their formation from liquid metal. The experimental evidence of the offered physical model is produced.

Язык оригиналаАнглийский
Название основной публикацииProceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012
DOI
СостояниеОпубликовано - 2012
Событие2012 7th International Forum on Strategic Technology, IFOST 2012 - Tomsk, Российская Федерация
Продолжительность: 18 сен 201221 сен 2012

Другое

Другое2012 7th International Forum on Strategic Technology, IFOST 2012
СтранаРоссийская Федерация
ГородTomsk
Период18.9.1221.9.12

Отпечаток

Metals
Metal cutting
Cutting tools
Liquid metals
Plastic deformation
Kinematics
Hydrodynamics
Cooling
Mechanical properties
Liquids

ASJC Scopus subject areas

  • Management of Technology and Innovation

Цитировать

Bannov, K. V., Gradoboev, A. V., & Matveev, V. S. (2012). Mechanism of the directed destruction of metals by cutting. В Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012 [6357786] https://doi.org/10.1109/IFOST.2012.6357786

Mechanism of the directed destruction of metals by cutting. / Bannov, Konstantin V.; Gradoboev, Alexander V.; Matveev, Valery S.

Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012. 6357786.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Bannov, KV, Gradoboev, AV & Matveev, VS 2012, Mechanism of the directed destruction of metals by cutting. в Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012., 6357786, Tomsk, Российская Федерация, 18.9.12. https://doi.org/10.1109/IFOST.2012.6357786
Bannov KV, Gradoboev AV, Matveev VS. Mechanism of the directed destruction of metals by cutting. В Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012. 6357786 https://doi.org/10.1109/IFOST.2012.6357786
Bannov, Konstantin V. ; Gradoboev, Alexander V. ; Matveev, Valery S. / Mechanism of the directed destruction of metals by cutting. Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012.
@inproceedings{eb06e087ea834a8c91268461dcbf33ea,
title = "Mechanism of the directed destruction of metals by cutting",
abstract = "In the given article, on the basis of the standard hydrodynamic representations, the physical model of the directed destruction of metals by cutting is offered. Process of cutting of metals is considered as process of the directed destruction, i.e. process of deep plastic deformation of metal always led up to destruction on surfaces of the cutting, defined by process kinematics. The design of the metal-cutting tool for part removal liquid-alloy (in the form of a ridge) from an internal contact zone of shaving is presented. Physicomechanical properties of ridges both their geometrical form and the sizes testify that they are formed of a stream of the melted metal owing to fast cooling in environment. Identity of mechanical properties of ridges and the modified layer on a tool surface of shaving testify to identity of conditions of their formation from liquid metal. The experimental evidence of the offered physical model is produced.",
keywords = "cutting of metals, shaving, speed of deformation, the directed destruction",
author = "Bannov, {Konstantin V.} and Gradoboev, {Alexander V.} and Matveev, {Valery S.}",
year = "2012",
doi = "10.1109/IFOST.2012.6357786",
language = "English",
isbn = "9781467317702",
booktitle = "Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012",

}

TY - GEN

T1 - Mechanism of the directed destruction of metals by cutting

AU - Bannov, Konstantin V.

AU - Gradoboev, Alexander V.

AU - Matveev, Valery S.

PY - 2012

Y1 - 2012

N2 - In the given article, on the basis of the standard hydrodynamic representations, the physical model of the directed destruction of metals by cutting is offered. Process of cutting of metals is considered as process of the directed destruction, i.e. process of deep plastic deformation of metal always led up to destruction on surfaces of the cutting, defined by process kinematics. The design of the metal-cutting tool for part removal liquid-alloy (in the form of a ridge) from an internal contact zone of shaving is presented. Physicomechanical properties of ridges both their geometrical form and the sizes testify that they are formed of a stream of the melted metal owing to fast cooling in environment. Identity of mechanical properties of ridges and the modified layer on a tool surface of shaving testify to identity of conditions of their formation from liquid metal. The experimental evidence of the offered physical model is produced.

AB - In the given article, on the basis of the standard hydrodynamic representations, the physical model of the directed destruction of metals by cutting is offered. Process of cutting of metals is considered as process of the directed destruction, i.e. process of deep plastic deformation of metal always led up to destruction on surfaces of the cutting, defined by process kinematics. The design of the metal-cutting tool for part removal liquid-alloy (in the form of a ridge) from an internal contact zone of shaving is presented. Physicomechanical properties of ridges both their geometrical form and the sizes testify that they are formed of a stream of the melted metal owing to fast cooling in environment. Identity of mechanical properties of ridges and the modified layer on a tool surface of shaving testify to identity of conditions of their formation from liquid metal. The experimental evidence of the offered physical model is produced.

KW - cutting of metals

KW - shaving

KW - speed of deformation

KW - the directed destruction

UR - http://www.scopus.com/inward/record.url?scp=84871839103&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84871839103&partnerID=8YFLogxK

U2 - 10.1109/IFOST.2012.6357786

DO - 10.1109/IFOST.2012.6357786

M3 - Conference contribution

AN - SCOPUS:84871839103

SN - 9781467317702

BT - Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012

ER -