Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology

A. V. Chumaevskii, E. S. Khoroshko, K. N. Kalashnikov, A. V. Filippov, T. A. Kalashnikova

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Выдержка

In this paper, the mechanical properties of samples of austenitic steel 321 obtained by the additive manufacturing method are studied. 3D printing of samples is carried out according to the technology based on the use of stainless steel wire filaments, applied to the surface of the substrate by electron beam melting in vacuum. Mechanical tests of the samples show that they correspond to those of as-cast steel 321 in terms of their strength characteristics. The characteristic features of the fracture of the samples cut from the base metal of the substrate, the zone of transition from the substrate to the sample, and the sample metal show that, when the material of the samples is fractured, finer pit structures are formed, and this indicates a more viscous nature of the fracture as compared to the base metal.

Язык оригиналаАнглийский
Название основной публикацииMechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018
Подзаголовок основной публикацииProceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures
РедакторыSunder Ramasubbu, Eduard S. Gorkunov, Victor E. Panin
ИздательAmerican Institute of Physics Inc.
ISBN (электронное издание)9780735417816
DOI
СостояниеОпубликовано - 19 дек 2018
Событие12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018 - Ekaterinburg, Российская Федерация
Продолжительность: 21 мая 201825 мая 2018

Серия публикаций

НазваниеAIP Conference Proceedings
Том2053
ISSN (печатное издание)0094-243X
ISSN (электронное издание)1551-7616

Конференция

Конференция12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018
СтранаРоссийская Федерация
ГородEkaterinburg
Период21.5.1825.5.18

Отпечаток

stainless steels
mechanical properties
electron beams
steels
metals
printing
casts
filaments
manufacturing
melting
wire
vacuum

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Цитировать

Chumaevskii, A. V., Khoroshko, E. S., Kalashnikov, K. N., Filippov, A. V., & Kalashnikova, T. A. (2018). Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology. В S. Ramasubbu, E. S. Gorkunov, & V. E. Panin (Ред.), Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures [040015] (AIP Conference Proceedings; Том 2053). American Institute of Physics Inc.. https://doi.org/10.1063/1.5084453

Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology. / Chumaevskii, A. V.; Khoroshko, E. S.; Kalashnikov, K. N.; Filippov, A. V.; Kalashnikova, T. A.

Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. ред. / Sunder Ramasubbu; Eduard S. Gorkunov; Victor E. Panin. American Institute of Physics Inc., 2018. 040015 (AIP Conference Proceedings; Том 2053).

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Chumaevskii, AV, Khoroshko, ES, Kalashnikov, KN, Filippov, AV & Kalashnikova, TA 2018, Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology. в S Ramasubbu, ES Gorkunov & VE Panin (ред.), Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures., 040015, AIP Conference Proceedings, том. 2053, American Institute of Physics Inc., Ekaterinburg, Российская Федерация, 21.5.18. https://doi.org/10.1063/1.5084453
Chumaevskii AV, Khoroshko ES, Kalashnikov KN, Filippov AV, Kalashnikova TA. Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology. В Ramasubbu S, Gorkunov ES, Panin VE, редакторы, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc. 2018. 040015. (AIP Conference Proceedings). https://doi.org/10.1063/1.5084453
Chumaevskii, A. V. ; Khoroshko, E. S. ; Kalashnikov, K. N. ; Filippov, A. V. ; Kalashnikova, T. A. / Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology. Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. редактор / Sunder Ramasubbu ; Eduard S. Gorkunov ; Victor E. Panin. American Institute of Physics Inc., 2018. (AIP Conference Proceedings).
@inproceedings{5749ee364a0341d889458a7dd40d0446,
title = "Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology",
abstract = "In this paper, the mechanical properties of samples of austenitic steel 321 obtained by the additive manufacturing method are studied. 3D printing of samples is carried out according to the technology based on the use of stainless steel wire filaments, applied to the surface of the substrate by electron beam melting in vacuum. Mechanical tests of the samples show that they correspond to those of as-cast steel 321 in terms of their strength characteristics. The characteristic features of the fracture of the samples cut from the base metal of the substrate, the zone of transition from the substrate to the sample, and the sample metal show that, when the material of the samples is fractured, finer pit structures are formed, and this indicates a more viscous nature of the fracture as compared to the base metal.",
author = "Chumaevskii, {A. V.} and Khoroshko, {E. S.} and Kalashnikov, {K. N.} and Filippov, {A. V.} and Kalashnikova, {T. A.}",
year = "2018",
month = "12",
day = "19",
doi = "10.1063/1.5084453",
language = "English",
series = "AIP Conference Proceedings",
publisher = "American Institute of Physics Inc.",
editor = "Sunder Ramasubbu and Gorkunov, {Eduard S.} and Panin, {Victor E.}",
booktitle = "Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018",

}

TY - GEN

T1 - Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology

AU - Chumaevskii, A. V.

AU - Khoroshko, E. S.

AU - Kalashnikov, K. N.

AU - Filippov, A. V.

AU - Kalashnikova, T. A.

PY - 2018/12/19

Y1 - 2018/12/19

N2 - In this paper, the mechanical properties of samples of austenitic steel 321 obtained by the additive manufacturing method are studied. 3D printing of samples is carried out according to the technology based on the use of stainless steel wire filaments, applied to the surface of the substrate by electron beam melting in vacuum. Mechanical tests of the samples show that they correspond to those of as-cast steel 321 in terms of their strength characteristics. The characteristic features of the fracture of the samples cut from the base metal of the substrate, the zone of transition from the substrate to the sample, and the sample metal show that, when the material of the samples is fractured, finer pit structures are formed, and this indicates a more viscous nature of the fracture as compared to the base metal.

AB - In this paper, the mechanical properties of samples of austenitic steel 321 obtained by the additive manufacturing method are studied. 3D printing of samples is carried out according to the technology based on the use of stainless steel wire filaments, applied to the surface of the substrate by electron beam melting in vacuum. Mechanical tests of the samples show that they correspond to those of as-cast steel 321 in terms of their strength characteristics. The characteristic features of the fracture of the samples cut from the base metal of the substrate, the zone of transition from the substrate to the sample, and the sample metal show that, when the material of the samples is fractured, finer pit structures are formed, and this indicates a more viscous nature of the fracture as compared to the base metal.

UR - http://www.scopus.com/inward/record.url?scp=85059428807&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85059428807&partnerID=8YFLogxK

U2 - 10.1063/1.5084453

DO - 10.1063/1.5084453

M3 - Conference contribution

AN - SCOPUS:85059428807

T3 - AIP Conference Proceedings

BT - Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018

A2 - Ramasubbu, Sunder

A2 - Gorkunov, Eduard S.

A2 - Panin, Victor E.

PB - American Institute of Physics Inc.

ER -