Mechanical and Microstructural Characterization of a New Corrosion Resistant Stainless Steel

I. Voiculescu, V. Geantǎ, R. Stefǎnoiu, C. Cotruţ, R. Ciocoiu, M. Ionescu

Результат исследований: Материалы для журнала

1 Цитирования (Scopus)

Аннотация

The paper investigates the manner in which the chemical composition and delivery status of a new type of stainless steel, highly alloyed with Ni and Cr, affect mechanical properties, microstructure and corrosion resistance. The results obtained during the mechanical test (tensile, compression, Charpy test and micro-hardness) have revealed promising values. During the corrosion test, the preferential attack of the reagent (Aqua regia) located on the grain boundaries, inclusions or polyhedral precipitates have been observed. On the corroded surfaces, some localized pitting effects on grain boundaries have been revealed. The analyses of the parameter values recorded during the corrosion test revealed that the corrosion current density had a low value, comparable to that of other specific types of stainless steels. The actual Icorr (1.089 μA/cm2) value measured for the experimental alloy proves good resistance to corrosion in 3% NaCl saline solution. The estimated rate of corrosion presented acceptable values (0.011 mm/year).

Язык оригиналаАнглийский
Номер статьи012018
ЖурналIOP Conference Series: Materials Science and Engineering
Том374
Номер выпуска1
DOI
СостояниеОпубликовано - 12 июн 2018
Опубликовано для внешнего пользованияДа
Событие2018 EUROINVENT International Conference on Innovative Research, EUROINVENT ICIR 2018 - Iasi, Румыния
Продолжительность: 17 мая 201818 мая 2018

    Fingerprint

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Цитировать