Measurement of the current transfer ratio for current shunts

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

6 Цитирования (Scopus)

Аннотация

Current shunts are widely used in metrological practice. The shunt is required to determine the value of its resistance on DC and AC currents to determine the transfer ratio error in the wide frequency band in process calibration. The paper describes a procedure for measuring the complex impedance of transfer ratio of current shunts in the frequency band using the lock-in amplifier with the differential input. The experimental results of the proposed procedure are described.

Язык оригиналаАнглийский
Название основной публикацииXXI IMEKO World Congress "Measurement in Research and Industry"
ИздательIMEKO-International Measurement Federation Secretariat
СостояниеОпубликовано - 2015
Событие21st IMEKO World Congress on Measurement in Research and Industry - Prague, Чешская Республика
Продолжительность: 30 авг 20154 сен 2015

Конференция

Конференция21st IMEKO World Congress on Measurement in Research and Industry
СтранаЧешская Республика
ГородPrague
Период30.8.154.9.15

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Fingerprint Подробные сведения о темах исследования «Measurement of the current transfer ratio for current shunts». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Baranov, P. F., Tsimbalist, E. I., Borikov, V. N., & Soltanova, D. G. (2015). Measurement of the current transfer ratio for current shunts. В XXI IMEKO World Congress "Measurement in Research and Industry" IMEKO-International Measurement Federation Secretariat.