Machining of titanium alloys with wave milling cutters

G. I. Korovin, S. I. Petrushin, R. H. Gubaidulina

Результат исследований: Материалы для книги/типы отчетовГлава

Аннотация

In the paper it is pointed out that machining of titanium alloys is the most difficult problem in metal cutting. The leading world companies are dealing with this problem, as titanium alloys are the basis of the aerospace industry. In the paper high-speed cutters with wavelike teeth edges used for titanium alloys processing are investigated. Every subsequent tooth is displaced at half-space distance. This reduces power load on the hardening of the machined surface. On the basis of power and wear-resistance studies, the advantage of wavy milling cutters in comparison with standard ones is established; it is proved that wavy cutters have a lower specific power load, greater wear resistance and less surface hardening.

Язык оригиналаАнглийский
Название основной публикацииMaterials and Processing Technology II
РедакторыDmitry A. Chinakhov, Dmitry A. Chinakhov
ИздательTrans Tech Publications Ltd
Страницы79-85
Число страниц7
ISBN (печатное издание)9783035713978
DOI
СостояниеОпубликовано - 1 янв 2018

Серия публикаций

НазваниеMaterials Science Forum
Том927 MSF
ISSN (печатное издание)0255-5476

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Подробные сведения о темах исследования «Machining of titanium alloys with wave milling cutters». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать