TY - JOUR
T1 - Joint influence of steered vacuum arc and negative repetitively pulsed bias on titanium macroparticles suppression
AU - Ryabchikov, Alexander I.
AU - Ananin, Peter S.
AU - Shevelev, Alexey E.
AU - Dektyarev, Sergey V.
AU - Sivin, Denis O.
AU - Ivanova, Anna I.
PY - 2018/12/15
Y1 - 2018/12/15
N2 - This paper presents the results of an experimental study of titanium macroparticle accumulation on a negatively biased substrate immersed in DC vacuum arc plasma generated by an evaporator with an axial magnetic field and a steered arc evaporator. Using a steered arc with a tangential magnetic field strength of 200 Gs reduced the generation of macroparticles 5-fold compared to a plasma source with an axial magnetic field. The application of repetitively pulsed negative bias significantly decreased macroparticle assembly on the substrate surface for both evaporator designs. After 20 min of ion-plasma treatment with negatively pulsed bias (−2 kV, 7 μs, 105 p.p.s.) and steered arc, the observed macroparticle surface density appeared to be 2 orders of magnitude smaller than after vacuum arc plasma deposition at the anode potential using an evaporator with an axial magnetic field. The possibility of high–frequency short–pulse plasma immersion ion implantation by implementing DC vacuum arc plasma is discussed.
AB - This paper presents the results of an experimental study of titanium macroparticle accumulation on a negatively biased substrate immersed in DC vacuum arc plasma generated by an evaporator with an axial magnetic field and a steered arc evaporator. Using a steered arc with a tangential magnetic field strength of 200 Gs reduced the generation of macroparticles 5-fold compared to a plasma source with an axial magnetic field. The application of repetitively pulsed negative bias significantly decreased macroparticle assembly on the substrate surface for both evaporator designs. After 20 min of ion-plasma treatment with negatively pulsed bias (−2 kV, 7 μs, 105 p.p.s.) and steered arc, the observed macroparticle surface density appeared to be 2 orders of magnitude smaller than after vacuum arc plasma deposition at the anode potential using an evaporator with an axial magnetic field. The possibility of high–frequency short–pulse plasma immersion ion implantation by implementing DC vacuum arc plasma is discussed.
KW - High-frequency short-pulse negative bias potential
KW - Macroparticles
KW - Steered arc
KW - Vacuum-arc plasma
UR - http://www.scopus.com/inward/record.url?scp=85042323058&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85042323058&partnerID=8YFLogxK
U2 - 10.1016/j.surfcoat.2018.02.047
DO - 10.1016/j.surfcoat.2018.02.047
M3 - Article
AN - SCOPUS:85042323058
VL - 355
SP - 240
EP - 246
JO - Surface and Coatings Technology
JF - Surface and Coatings Technology
SN - 0257-8972
ER -