Investigation of the hard films deposited by PVD-magnetron sputtering on the cutting tools

Daniel Vlasceanu, Cosmin Cotrut, Mihai Tarcolea, Florin Baciu, Mariana Nicodim

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

Hard coatings based on hard materials are especially suitable for the purposes of protection against metallurgical tools wear. The properties involving high hardness and thermal stability with low wear resistance and friction coefficient are the main goal to achieve. Hard materials such as WC are widely used as cutting tools material due to their high hardness, strength and fracture toughness. Elemental composition and topography, of the coatings, it was determined by the SEM method. Phase composition and texture has studied by X-ray diffraction technique. The mechanical property of coatings has investigated by microhardness measurement and scratch test. The results of experimental research proved that the investigated coatings exhibited a high microhardness having good adhesion on the substrate (> 50 N).

Язык оригиналаАнглийский
Название основной публикацииAnnals of DAAAM for 2008 and Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing and Automation
Подзаголовок основной публикацииFocus on Next Generation of Intelligent Systems and Solutions"
ИздательDanube Adria Association for Automation and Manufacturing, DAAAM
Страницы1487-1488
Число страниц2
ISBN (печатное издание)9783901509681
СостояниеОпубликовано - 1 янв 2008
Опубликовано для внешнего пользованияДа
СобытиеAnnals of DAAAM for 2008 and 19th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Next Generation of Intelligent Systems and Solutions" - Trnava, Словакия
Продолжительность: 22 окт 200825 окт 2008

Серия публикаций

НазваниеAnnals of DAAAM and Proceedings of the International DAAAM Symposium
ISSN (печатное издание)1726-9679

Конференция

КонференцияAnnals of DAAAM for 2008 and 19th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Next Generation of Intelligent Systems and Solutions"
СтранаСловакия
ГородTrnava
Период22.10.0825.10.08

ASJC Scopus subject areas

  • Computer Science Applications
  • Control and Systems Engineering
  • Electrical and Electronic Engineering
  • Industrial and Manufacturing Engineering
  • Mechanical Engineering

Fingerprint Подробные сведения о темах исследования «Investigation of the hard films deposited by PVD-magnetron sputtering on the cutting tools». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Vlasceanu, D., Cotrut, C., Tarcolea, M., Baciu, F., & Nicodim, M. (2008). Investigation of the hard films deposited by PVD-magnetron sputtering on the cutting tools. В Annals of DAAAM for 2008 and Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Next Generation of Intelligent Systems and Solutions" (стр. 1487-1488). (Annals of DAAAM and Proceedings of the International DAAAM Symposium). Danube Adria Association for Automation and Manufacturing, DAAAM.