Investigation of laser-welded titanium and stainless steel specimens using digital radiography methods

Yu V. Alkhimov, S. F. Gnyusov, B. I. Kapranov, V. A. Klimenov, A. M. Orishich

Результат исследований: Материалы для журналаСтатья

8 Цитирования (Scopus)

Аннотация

Specimens of "titanium-titanium" and "titanium-12X18H10T steel" welded joints that were obtained using laser radiation were investigated. When "titanium-12X18H10T steel" welded joints were formed, a copper plate was used as the intermediate insert. The digital computer radiogra- phy method using phosphorous image plates was used to study specimens; images were read out from image plates using an HD-CR 35 laser reader produced by Durr NDT. Fuji SR and Kodak SO-170 image plates were used in the experiments. The relative contrast sensitivity of X-ray images of speci- mens that was obtained experimentally was 1-1.5% at exposures that were two to three times lower than for conventional radiography on an X-ray film. Defects with openings of > 0.1 mm were detected.

Язык оригиналаАнглийский
Страницы (с-по)238-244
Число страниц7
ЖурналRussian Journal of Nondestructive Testing
Том48
Номер выпуска4
DOI
СостояниеОпубликовано - апр 2012

ASJC Scopus subject areas

  • Mechanical Engineering
  • Mechanics of Materials
  • Condensed Matter Physics
  • Materials Science(all)

Fingerprint Подробные сведения о темах исследования «Investigation of laser-welded titanium and stainless steel specimens using digital radiography methods». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать