Investigation of cast and annealed Ti25Nb10Zr alloy as material for orthopedic devices

Raúl Bolmaro, Anca C. Parau, Vasile Pruna, Maria A. Surmeneva, Lidia R. Constantin, Martina Avalos, Cosmin M. Cotrut, Raluca Tutuianu, Mariana Braic, Danut V. Cojocaru, Ioan Dan, Sorin Croitoru, Roman A. Surmenev, Alina Vladescu

Результат исследований: Материалы для журналаСтатья

Выдержка

In the present work, we report the preparation of a novel titanium-based alloy, namely Ti25Nb10Zr, by cold crucible levitation melting technique. The cast alloy consists of a complex microstructure with large Beta phase grains (54%, 50-150 μm) with a regularly connected net of Alpha′ (orthorhombic, 46%) phase running along boundaries and across the grains and keeping a regular misorientation with respect to the Beta phase. An intermeshed 51% Alpha and 49% Beta phases with lamellar microstructure were found by annealing. The electrochemical tests showed that both alloys were affected by the corrosion process. A good corrosion resistance in SBF at 37 °C was found for the cast form. The cast alloy is more resistant when immersed into solutions with pH2 and pH7, while the annealed one is resistant in pH5 solution. Surface potential of both alloys is negative, with the annealing process leading to a slight decrease of that property. Collectively, the biological results indicate a more favorable viability on cast form as compared to annealed one, suggesting that the cast alloy is promising for biomedical applications.

Язык оригиналаАнглийский
Страницы (с-по)3399-3414
Число страниц16
ЖурналJournal of Materials Research and Technology
Том8
Номер выпуска4
DOI
СостояниеОпубликовано - 1 июл 2019

Отпечаток

Orthopedics
Levitation melting
Annealing
Microstructure
Crucibles
Surface potential
Titanium
Corrosion resistance
Corrosion

ASJC Scopus subject areas

  • Ceramics and Composites
  • Biomaterials
  • Surfaces, Coatings and Films
  • Metals and Alloys

Цитировать

Investigation of cast and annealed Ti25Nb10Zr alloy as material for orthopedic devices. / Bolmaro, Raúl; Parau, Anca C.; Pruna, Vasile; Surmeneva, Maria A.; Constantin, Lidia R.; Avalos, Martina; Cotrut, Cosmin M.; Tutuianu, Raluca; Braic, Mariana; Cojocaru, Danut V.; Dan, Ioan; Croitoru, Sorin; Surmenev, Roman A.; Vladescu, Alina.

В: Journal of Materials Research and Technology, Том 8, № 4, 01.07.2019, стр. 3399-3414.

Результат исследований: Материалы для журналаСтатья

Bolmaro, R, Parau, AC, Pruna, V, Surmeneva, MA, Constantin, LR, Avalos, M, Cotrut, CM, Tutuianu, R, Braic, M, Cojocaru, DV, Dan, I, Croitoru, S, Surmenev, RA & Vladescu, A 2019, 'Investigation of cast and annealed Ti25Nb10Zr alloy as material for orthopedic devices', Journal of Materials Research and Technology, том. 8, № 4, стр. 3399-3414. https://doi.org/10.1016/j.jmrt.2019.06.006
Bolmaro, Raúl ; Parau, Anca C. ; Pruna, Vasile ; Surmeneva, Maria A. ; Constantin, Lidia R. ; Avalos, Martina ; Cotrut, Cosmin M. ; Tutuianu, Raluca ; Braic, Mariana ; Cojocaru, Danut V. ; Dan, Ioan ; Croitoru, Sorin ; Surmenev, Roman A. ; Vladescu, Alina. / Investigation of cast and annealed Ti25Nb10Zr alloy as material for orthopedic devices. В: Journal of Materials Research and Technology. 2019 ; Том 8, № 4. стр. 3399-3414.
@article{40c00d536d7345ceb41ff18c3482a272,
title = "Investigation of cast and annealed Ti25Nb10Zr alloy as material for orthopedic devices",
abstract = "In the present work, we report the preparation of a novel titanium-based alloy, namely Ti25Nb10Zr, by cold crucible levitation melting technique. The cast alloy consists of a complex microstructure with large Beta phase grains (54{\%}, 50-150 μm) with a regularly connected net of Alpha′ (orthorhombic, 46{\%}) phase running along boundaries and across the grains and keeping a regular misorientation with respect to the Beta phase. An intermeshed 51{\%} Alpha and 49{\%} Beta phases with lamellar microstructure were found by annealing. The electrochemical tests showed that both alloys were affected by the corrosion process. A good corrosion resistance in SBF at 37 °C was found for the cast form. The cast alloy is more resistant when immersed into solutions with pH2 and pH7, while the annealed one is resistant in pH5 solution. Surface potential of both alloys is negative, with the annealing process leading to a slight decrease of that property. Collectively, the biological results indicate a more favorable viability on cast form as compared to annealed one, suggesting that the cast alloy is promising for biomedical applications.",
keywords = "Corrosion resistance, SBF, Surface potential, Viability",
author = "Ra{\'u}l Bolmaro and Parau, {Anca C.} and Vasile Pruna and Surmeneva, {Maria A.} and Constantin, {Lidia R.} and Martina Avalos and Cotrut, {Cosmin M.} and Raluca Tutuianu and Mariana Braic and Cojocaru, {Danut V.} and Ioan Dan and Sorin Croitoru and Surmenev, {Roman A.} and Alina Vladescu",
year = "2019",
month = "7",
day = "1",
doi = "10.1016/j.jmrt.2019.06.006",
language = "English",
volume = "8",
pages = "3399--3414",
journal = "Journal of Materials Research and Technology",
issn = "2238-7854",
publisher = "Elsevier Editora Ltda",
number = "4",

}

TY - JOUR

T1 - Investigation of cast and annealed Ti25Nb10Zr alloy as material for orthopedic devices

AU - Bolmaro, Raúl

AU - Parau, Anca C.

AU - Pruna, Vasile

AU - Surmeneva, Maria A.

AU - Constantin, Lidia R.

AU - Avalos, Martina

AU - Cotrut, Cosmin M.

AU - Tutuianu, Raluca

AU - Braic, Mariana

AU - Cojocaru, Danut V.

AU - Dan, Ioan

AU - Croitoru, Sorin

AU - Surmenev, Roman A.

AU - Vladescu, Alina

PY - 2019/7/1

Y1 - 2019/7/1

N2 - In the present work, we report the preparation of a novel titanium-based alloy, namely Ti25Nb10Zr, by cold crucible levitation melting technique. The cast alloy consists of a complex microstructure with large Beta phase grains (54%, 50-150 μm) with a regularly connected net of Alpha′ (orthorhombic, 46%) phase running along boundaries and across the grains and keeping a regular misorientation with respect to the Beta phase. An intermeshed 51% Alpha and 49% Beta phases with lamellar microstructure were found by annealing. The electrochemical tests showed that both alloys were affected by the corrosion process. A good corrosion resistance in SBF at 37 °C was found for the cast form. The cast alloy is more resistant when immersed into solutions with pH2 and pH7, while the annealed one is resistant in pH5 solution. Surface potential of both alloys is negative, with the annealing process leading to a slight decrease of that property. Collectively, the biological results indicate a more favorable viability on cast form as compared to annealed one, suggesting that the cast alloy is promising for biomedical applications.

AB - In the present work, we report the preparation of a novel titanium-based alloy, namely Ti25Nb10Zr, by cold crucible levitation melting technique. The cast alloy consists of a complex microstructure with large Beta phase grains (54%, 50-150 μm) with a regularly connected net of Alpha′ (orthorhombic, 46%) phase running along boundaries and across the grains and keeping a regular misorientation with respect to the Beta phase. An intermeshed 51% Alpha and 49% Beta phases with lamellar microstructure were found by annealing. The electrochemical tests showed that both alloys were affected by the corrosion process. A good corrosion resistance in SBF at 37 °C was found for the cast form. The cast alloy is more resistant when immersed into solutions with pH2 and pH7, while the annealed one is resistant in pH5 solution. Surface potential of both alloys is negative, with the annealing process leading to a slight decrease of that property. Collectively, the biological results indicate a more favorable viability on cast form as compared to annealed one, suggesting that the cast alloy is promising for biomedical applications.

KW - Corrosion resistance

KW - SBF

KW - Surface potential

KW - Viability

UR - http://www.scopus.com/inward/record.url?scp=85069053891&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85069053891&partnerID=8YFLogxK

U2 - 10.1016/j.jmrt.2019.06.006

DO - 10.1016/j.jmrt.2019.06.006

M3 - Article

AN - SCOPUS:85069053891

VL - 8

SP - 3399

EP - 3414

JO - Journal of Materials Research and Technology

JF - Journal of Materials Research and Technology

SN - 2238-7854

IS - 4

ER -