Investigating vibration characteristics of magnetostrictive transducers for air-coupled ultrasonic NDT of composites

D. A. Derusova, V. P. Vavilov, N. V. Druzhinin, N. P. Kolomeets, A. O. Chulkov, V. E. Rubtsov, E. A. Kolubaev

Результат исследований: Материалы для журналаСтатьярецензирование

7 Цитирования (Scopus)


In this study, high-power ultrasonics has been used for non-contact nondestructive testing of composites. Air-coupled magnetostrictive ultrasonic transducers provide reasonable amplitudes of horn oscillations even if this type of ultrasonic stimulation is close to the idle mode. Four types of ultrasonic horns have been designed and manufactured in order to choose an optimal horn configuration. For each horn, the dependence of vibration amplitude on ultrasonic unit power has been found to exhibit a good match between the theoretical and experimental results. The resonance frequencies and amplitudes of oscillatory velocity were experimentally evaluated by using the technique of scanning laser vibrometry and modeled by means of the Autodesk Inventor software. An air-coupled magnetostrictive transducer, in conjunction with an optimized horn, has been used in the evaluation of impact damage in a graphite epoxy composite and detection of water and excessive epoxy adhesive in an aviation honeycomb panel. It is expected that the technique of air-coupled ultrasonics may be useful for inspecting thin, fragile and hydrophilic materials.

Язык оригиналаАнглийский
Номер статьи102151
ЖурналNDT and E International
СостояниеОпубликовано - 1 окт 2019

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering

Fingerprint Подробные сведения о темах исследования «Investigating vibration characteristics of magnetostrictive transducers for air-coupled ultrasonic NDT of composites». Вместе они формируют уникальный семантический отпечаток (fingerprint).