Investigating the influence of the power supply type upon the weld joints properties and health characteristics of the manual arc welding

D. P. Ilyaschenko, D. A. Chinakhov

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

10 Цитирования (Scopus)

Аннотация

The given work considers the influence of the power supply type (diode rectifier DR-306 and upon new generation inverter Nebula-315) upon the chemical composition, microstructure, mechanical properties of the weld joints and health characteristics of the manual arc welding process. It has been found out that the power supply type has a significant influence upon the weld joints properties and health characteristics of the manual arc welding process. Using the inverter power supply type provides less heat input into a molten electrode metal drop which decreases silicium and manganese burning, improves impact resistance under low (negative) temperature and reduces the risk of workers respiratory diseases. The reliability of weld joints in metal constructions and technical devices in electrical, oil-producing, mining, chemical, engineering and other industries has a significant impact upon safety and economic efficiency. Manual arc welding with coated rods is one of the main technological processes for welding constructions inappropriate for rational mechanization, automation and robotization. The manual arc welding process is easier to use, more flexible and universal, requiring less auxiliary operations and equipment. That's why manual arc welding has no alternative when repairing, assembling and reconstructing technical devices. Works [1, 2] considered the influence of the power supply type upon the stability of the manual arc welding process, scattering and length of the heat affected area. We have carried out a number of experiments to estimate the influence of the power supply type upon the chemical composition, microstructure, mechanical properties of the weld joints and health characteristics of manual arc welding. To carry out the investigation we welded 09Mn2Si steel 59×6 tubes with LB-52U electrodes 3.2 mm in diameter and 45 steel with UONI 13/55 electrodes applying diode rectifier DR-306 and a new generation inverter Nebula-315 as power supplies. Analysis of the experimental data on the chemical composition of the weld joint [3] showed that the type of the power supply influences the weld joint chemical composition. Nebula 315 limits the short-circuit current (fig. 1) [1, 2]. The calculation shows that when using the inverter power supply, energy spent on electrode metal melting makes Q = 1,0870×10 7J per second as compared to Q = 1,2061×10 7J with diode rectifier. Thus, the diode rectifier reduces alloy burning (Si and Mn).

Язык оригиналаАнглийский
Название основной публикацииMaterials Science Forum
Страницы608-611
Число страниц4
Том704-705
DOI
СостояниеОпубликовано - 2012
Событие6th International Conference on Physical and Numerical Simulation of Materials Processing, ICPNS2010 - Guilin, Китай
Продолжительность: 16 ноя 201019 ноя 2010

Серия публикаций

НазваниеMaterials Science Forum
Том704-705
ISSN (печатное издание)02555476

Другое

Другое6th International Conference on Physical and Numerical Simulation of Materials Processing, ICPNS2010
СтранаКитай
ГородGuilin
Период16.11.1019.11.10

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

Fingerprint Подробные сведения о темах исследования «Investigating the influence of the power supply type upon the weld joints properties and health characteristics of the manual arc welding». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать