Influence of volume and surface strengthening on the scale deformation levels of low-alloyed steel

V. E. Panin, A. I. Slosman, N. A. Antipina, B. B. Ovechkin, A. V. Litvinenko

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Выдержка

Plastic deformation, in common case, proceeds the mutual co-ordination on different scale levels. The tension concentrators and possibility of spreading the lines of localized deformation of corresponding scale level for deformation realization on this level. Both of them are determined by a great number of factors. In this work the influence of structure dimensions the surface state on deformation localization on 12X1M steel mesoscale level was investigated. The dimensions of inside structure were varied by thermal processing condition and the surface state was varied by processing in nitrogen containing glow discharge plasma. It was shown that by increasing the small-grain samples plastic deformation takes place by spreading localized deformation mesobands from the initial mesoconcentrators. By stretching it takes place by Luders' line shifting. By compressing it takes place by forming the mesolines system of localized deformation in the connected directions of maximum tangential stress. In both cases insignificant volume of materials is involved.

Язык оригиналаАнглийский
Название основной публикации5th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2001
ИздательInstitute of Electrical and Electronics Engineers Inc.
Страницы274-277
Число страниц4
Том1
ISBN (печатное издание)0780370082, 9780780370081
DOI
СостояниеОпубликовано - 2001
Событие5th Korea-Russia International Symposium on Science and Technology, KORUS 2001 - Tomsk, Российская Федерация
Продолжительность: 26 июн 20013 июл 2001

Другое

Другое5th Korea-Russia International Symposium on Science and Technology, KORUS 2001
СтранаРоссийская Федерация
ГородTomsk
Период26.6.013.7.01

Отпечаток

Steel
Plastics
Surface states
Nitrogen
Hot Temperature
Plastic deformation
Glow discharges
Stretching
Plasmas
Processing
Direction compound

ASJC Scopus subject areas

  • Clinical Biochemistry
  • Computer Networks and Communications
  • Biotechnology
  • Civil and Structural Engineering
  • Mechanics of Materials
  • Electronic, Optical and Magnetic Materials
  • Materials Chemistry
  • Surfaces, Coatings and Films

Цитировать

Panin, V. E., Slosman, A. I., Antipina, N. A., Ovechkin, B. B., & Litvinenko, A. V. (2001). Influence of volume and surface strengthening on the scale deformation levels of low-alloyed steel. В 5th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2001 (Том 1, стр. 274-277). [975122] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/KORUS.2001.975122

Influence of volume and surface strengthening on the scale deformation levels of low-alloyed steel. / Panin, V. E.; Slosman, A. I.; Antipina, N. A.; Ovechkin, B. B.; Litvinenko, A. V.

5th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2001. Том 1 Institute of Electrical and Electronics Engineers Inc., 2001. стр. 274-277 975122.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Panin, VE, Slosman, AI, Antipina, NA, Ovechkin, BB & Litvinenko, AV 2001, Influence of volume and surface strengthening on the scale deformation levels of low-alloyed steel. в 5th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2001. том. 1, 975122, Institute of Electrical and Electronics Engineers Inc., стр. 274-277, Tomsk, Российская Федерация, 26.6.01. https://doi.org/10.1109/KORUS.2001.975122
Panin VE, Slosman AI, Antipina NA, Ovechkin BB, Litvinenko AV. Influence of volume and surface strengthening on the scale deformation levels of low-alloyed steel. В 5th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2001. Том 1. Institute of Electrical and Electronics Engineers Inc. 2001. стр. 274-277. 975122 https://doi.org/10.1109/KORUS.2001.975122
Panin, V. E. ; Slosman, A. I. ; Antipina, N. A. ; Ovechkin, B. B. ; Litvinenko, A. V. / Influence of volume and surface strengthening on the scale deformation levels of low-alloyed steel. 5th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2001. Том 1 Institute of Electrical and Electronics Engineers Inc., 2001. стр. 274-277
@inproceedings{b02325e579f84a03b22e0a7c2ad505cd,
title = "Influence of volume and surface strengthening on the scale deformation levels of low-alloyed steel",
abstract = "Plastic deformation, in common case, proceeds the mutual co-ordination on different scale levels. The tension concentrators and possibility of spreading the lines of localized deformation of corresponding scale level for deformation realization on this level. Both of them are determined by a great number of factors. In this work the influence of structure dimensions the surface state on deformation localization on 12X1M steel mesoscale level was investigated. The dimensions of inside structure were varied by thermal processing condition and the surface state was varied by processing in nitrogen containing glow discharge plasma. It was shown that by increasing the small-grain samples plastic deformation takes place by spreading localized deformation mesobands from the initial mesoconcentrators. By stretching it takes place by Luders' line shifting. By compressing it takes place by forming the mesolines system of localized deformation in the connected directions of maximum tangential stress. In both cases insignificant volume of materials is involved.",
keywords = "localization of deformation, mesomechanics",
author = "Panin, {V. E.} and Slosman, {A. I.} and Antipina, {N. A.} and Ovechkin, {B. B.} and Litvinenko, {A. V.}",
year = "2001",
doi = "10.1109/KORUS.2001.975122",
language = "English",
isbn = "0780370082",
volume = "1",
pages = "274--277",
booktitle = "5th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2001",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Influence of volume and surface strengthening on the scale deformation levels of low-alloyed steel

AU - Panin, V. E.

AU - Slosman, A. I.

AU - Antipina, N. A.

AU - Ovechkin, B. B.

AU - Litvinenko, A. V.

PY - 2001

Y1 - 2001

N2 - Plastic deformation, in common case, proceeds the mutual co-ordination on different scale levels. The tension concentrators and possibility of spreading the lines of localized deformation of corresponding scale level for deformation realization on this level. Both of them are determined by a great number of factors. In this work the influence of structure dimensions the surface state on deformation localization on 12X1M steel mesoscale level was investigated. The dimensions of inside structure were varied by thermal processing condition and the surface state was varied by processing in nitrogen containing glow discharge plasma. It was shown that by increasing the small-grain samples plastic deformation takes place by spreading localized deformation mesobands from the initial mesoconcentrators. By stretching it takes place by Luders' line shifting. By compressing it takes place by forming the mesolines system of localized deformation in the connected directions of maximum tangential stress. In both cases insignificant volume of materials is involved.

AB - Plastic deformation, in common case, proceeds the mutual co-ordination on different scale levels. The tension concentrators and possibility of spreading the lines of localized deformation of corresponding scale level for deformation realization on this level. Both of them are determined by a great number of factors. In this work the influence of structure dimensions the surface state on deformation localization on 12X1M steel mesoscale level was investigated. The dimensions of inside structure were varied by thermal processing condition and the surface state was varied by processing in nitrogen containing glow discharge plasma. It was shown that by increasing the small-grain samples plastic deformation takes place by spreading localized deformation mesobands from the initial mesoconcentrators. By stretching it takes place by Luders' line shifting. By compressing it takes place by forming the mesolines system of localized deformation in the connected directions of maximum tangential stress. In both cases insignificant volume of materials is involved.

KW - localization of deformation

KW - mesomechanics

UR - http://www.scopus.com/inward/record.url?scp=84961784243&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84961784243&partnerID=8YFLogxK

U2 - 10.1109/KORUS.2001.975122

DO - 10.1109/KORUS.2001.975122

M3 - Conference contribution

AN - SCOPUS:84961784243

SN - 0780370082

SN - 9780780370081

VL - 1

SP - 274

EP - 277

BT - 5th Korea-Russia International Symposium on Science and Technology - Proceedings: KORUS 2001

PB - Institute of Electrical and Electronics Engineers Inc.

ER -