Выдержка
The physical-mechanical of properties of biocompatible calcium phosphate coatings deposited onto titanium and silicon substrates from erosion materials, which are generated by irradiating hydroxyapatite (synthetic and natural) targets by means of the high-power pulsed ion beam of a Temp-4 accelerator, are investigated. A calculation technique for predicting the rate and energy efficiency of deposition using pulsed ion beams is proposed. Their characteristics are analyzed as applied to the formation of calcium phosphate coatings.
| Язык оригинала | Английский |
|---|---|
| Страницы (с-по) | 952-958 |
| Число страниц | 7 |
| Журнал | Journal of Surface Investigation |
| Том | 7 |
| Номер выпуска | 5 |
| DOI | |
| Состояние | Опубликовано - 1 сен 2013 |
Отпечаток
ASJC Scopus subject areas
- Surfaces, Coatings and Films
Цитировать
Influence of the high-power ion-beam irradiation of a hydroxyapatite target on the properties of formed calcium phosphate coatings. / Bleykher, G. A.; Volokitina, T. L.; Tverdokhlebov, S. I.
В: Journal of Surface Investigation, Том 7, № 5, 01.09.2013, стр. 952-958.Результат исследований: Материалы для журнала › Статья
}
TY - JOUR
T1 - Influence of the high-power ion-beam irradiation of a hydroxyapatite target on the properties of formed calcium phosphate coatings
AU - Bleykher, G. A.
AU - Volokitina, T. L.
AU - Tverdokhlebov, S. I.
PY - 2013/9/1
Y1 - 2013/9/1
N2 - The physical-mechanical of properties of biocompatible calcium phosphate coatings deposited onto titanium and silicon substrates from erosion materials, which are generated by irradiating hydroxyapatite (synthetic and natural) targets by means of the high-power pulsed ion beam of a Temp-4 accelerator, are investigated. A calculation technique for predicting the rate and energy efficiency of deposition using pulsed ion beams is proposed. Their characteristics are analyzed as applied to the formation of calcium phosphate coatings.
AB - The physical-mechanical of properties of biocompatible calcium phosphate coatings deposited onto titanium and silicon substrates from erosion materials, which are generated by irradiating hydroxyapatite (synthetic and natural) targets by means of the high-power pulsed ion beam of a Temp-4 accelerator, are investigated. A calculation technique for predicting the rate and energy efficiency of deposition using pulsed ion beams is proposed. Their characteristics are analyzed as applied to the formation of calcium phosphate coatings.
UR - http://www.scopus.com/inward/record.url?scp=84885630486&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84885630486&partnerID=8YFLogxK
U2 - 10.1134/S1027451013050273
DO - 10.1134/S1027451013050273
M3 - Article
AN - SCOPUS:84885630486
VL - 7
SP - 952
EP - 958
JO - Journal of Surface Investigation
JF - Journal of Surface Investigation
SN - 1027-4510
IS - 5
ER -