Influence of the cobalt additive on the flux cored wire of system Fe-C-Si-Mn-Cr-Ni-Mo-V

I. V. Osetkovskiy, N. A. Kozyrev, A. I. Gusev, O. A. Kozyreva, R. A. Gizatulin, A. V. Valueva

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

1 Цитирования (Scopus)

Аннотация

Studied the effect of the introduction of cobalt into the charge powder fused wire system Fe-C-Si-Mn-Cr-Ni-Mo-V, used in cladding assemblies and equipment parts and mechanisms operating under abrasive and abrasive shock loads., the samples cored wires were manufactured in the laboratory conditions using appropriate powder materials and as a carbonfluoride contained material were used the dust from gas purification of aluminum production.

Язык оригиналаАнглийский
Название основной публикацииMaterials and their Application - ICMA 2016
РедакторыNikita V. Martyushev, Denis V. Valuev
ИздательTrans Tech Publications Ltd
Страницы63-67
Число страниц5
ISBN (печатное издание)9783035711790
DOI
СостояниеОпубликовано - 1 янв 2017
СобытиеInternational Conference on Materials and their Application, ICMA 2016 - Yurga, Российская Федерация
Продолжительность: 15 дек 201616 дек 2016

Серия публикаций

НазваниеKey Engineering Materials
Том736 KEM
ISSN (печатное издание)1013-9826

Конференция

КонференцияInternational Conference on Materials and their Application, ICMA 2016
СтранаРоссийская Федерация
ГородYurga
Период15.12.1616.12.16

    Fingerprint

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Цитировать

Osetkovskiy, I. V., Kozyrev, N. A., Gusev, A. I., Kozyreva, O. A., Gizatulin, R. A., & Valueva, A. V. (2017). Influence of the cobalt additive on the flux cored wire of system Fe-C-Si-Mn-Cr-Ni-Mo-V. В N. V. Martyushev, & D. V. Valuev (Ред.), Materials and their Application - ICMA 2016 (стр. 63-67). (Key Engineering Materials; Том 736 KEM). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.736.63