Influence of soaking time of modifier in melt on microstructure of Al-12%Si alloys

N. V. Martyushev, V. S. Bashev, A. P. Zykova

Результат исследований: Материалы для журналаСтатья

2 Цитирования (Scopus)

Аннотация

The influence of the soaking time of the silumin melt with a modifying nanopowder W on the microstructure and the impact toughness of the Al-12%Si silumin is studied in the paper. It was established that when introducing 0.1 mass. % of W and soaking it for 10 min, up to 30% of the inassimilable nanopowder W remains in the crucible after pouring. At that, the microstructure of castings is refined, and the impact toughness increases by 12 % compared to the initial alloy. It was established that the powder remaining in the crucible after melting consists of the remnants of metallic W, WO3 and W3O. Nanopowder W is completely assimilated by the melt if the soaking time is increased by 120 min; in this case, the impact toughness reduces, which is connected with the increase of dendrites and silicon wafers sizes.

Язык оригиналаАнглийский
Номер статьи012118
ЖурналIOP Conference Series: Materials Science and Engineering
Том177
Номер выпуска1
DOI
СостояниеОпубликовано - 1 мар 2017
Событие10th International Conference on Mechanical Engineering, Automation and Control Systems 2016, MEACS 2016 - Tomsk, Российская Федерация
Продолжительность: 27 окт 201629 окт 2016

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Подробные сведения о темах исследования «Influence of soaking time of modifier in melt on microstructure of Al-12%Si alloys». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать