Influence of H 2 and HBr-additives on Cu and CuBr vapor lasers performance

Gennadiy S. Evtushenko, Dmitriy V. Shiyanov, Oleg V. Zhdaneev, Viktor B. Sukhanov

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

1 Цитирования (Scopus)

Аннотация

Investigations of the output parameters of CuBr (Cu)+HBr laser systems have shown that HBr additives to the CuBr laser active medium result in an increase of the laser output power and efficiency that compares, in this case, with that of a CuBr laser with H 2 additives. It has been found that the vapor of working substance are additionally produced in gas-discharge tubes (GDTs) less than 2 cm in diameter due to expulsion of copper atoms from the GDT walls by HBr. The results of simulating the kinetics of the copper vapor laser active medium with HBr additives show that the enhancement of the laser performance parameters can be explained by the processes of chemical transformation of copper from the solid phase into the gas one.

Язык оригиналаАнглийский
Название основной публикацииProceedings of SPIE - The International Society for Optical Engineering
РедакторыJ. Kodymova
Страницы511-518
Число страниц8
Том5777
ИзданиеPART I
DOI
СостояниеОпубликовано - 2005
СобытиеXV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, GCL/HPL 2004 - Prague, Чешская Республика
Продолжительность: 30 авг 20043 сен 2004

Другое

ДругоеXV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, GCL/HPL 2004
СтранаЧешская Республика
ГородPrague
Период30.8.043.9.04

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Condensed Matter Physics

Fingerprint Подробные сведения о темах исследования «Influence of H <sub>2</sub> and HBr-additives on Cu and CuBr vapor lasers performance». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать