Influence of electronic radiation on resistance to wear of TiC-NiCr hard alloy at cutting steel

V. E. Ovcharenko, S. G. Psakhie, O. V. Lapshin, A. P. Savitskii

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

1 цитирование (Scopus)

Выдержка

An experimental investigation into the effect of impulse electron-beam irradiation of the sintered TiC/NiCr hard alloy on its wear resistance while cutting steel was performed. The microstructure of the surface layer, surface roughness, and transverse rupture strength of the alloy were studied after irradiation. Changes in the microstructure and in the properties of the material were shown to be the result of the interaction of the carbide particles with the liquid metal binder under high rates of heating and cooling of the surface layer.

Язык оригиналаАнглийский
Название основной публикацииEuro PM 2005: Powder Metallurgy Congress and Exhibition
ИздательEuropean Powder Metallurgy Association (EPMA)
Страницы267-272
Число страниц6
Том3
ISBN (печатное издание)9781899072187
СостояниеОпубликовано - 2005
СобытиеEuropean Powder Metallurgy Congress and Exhibition, Euro PM 2005 - Prague, Чешская Республика
Продолжительность: 2 окт 20055 окт 2005

Другое

ДругоеEuropean Powder Metallurgy Congress and Exhibition, Euro PM 2005
СтранаЧешская Республика
ГородPrague
Период2.10.055.10.05

Отпечаток

Steel
surface layers
Wear of materials
Irradiation
steels
Radiation
microstructure
Microstructure
irradiation
radiation
liquid metals
Liquid metals
wear resistance
electronics
carbides
Wear resistance
Binders
Carbides
impulses
Electron beams

ASJC Scopus subject areas

  • Mechanics of Materials
  • Ceramics and Composites
  • Materials Chemistry
  • Metals and Alloys
  • Condensed Matter Physics

Цитировать

Ovcharenko, V. E., Psakhie, S. G., Lapshin, O. V., & Savitskii, A. P. (2005). Influence of electronic radiation on resistance to wear of TiC-NiCr hard alloy at cutting steel. В Euro PM 2005: Powder Metallurgy Congress and Exhibition (Том 3, стр. 267-272). European Powder Metallurgy Association (EPMA).

Influence of electronic radiation on resistance to wear of TiC-NiCr hard alloy at cutting steel. / Ovcharenko, V. E.; Psakhie, S. G.; Lapshin, O. V.; Savitskii, A. P.

Euro PM 2005: Powder Metallurgy Congress and Exhibition. Том 3 European Powder Metallurgy Association (EPMA), 2005. стр. 267-272.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Ovcharenko, VE, Psakhie, SG, Lapshin, OV & Savitskii, AP 2005, Influence of electronic radiation on resistance to wear of TiC-NiCr hard alloy at cutting steel. в Euro PM 2005: Powder Metallurgy Congress and Exhibition. том. 3, European Powder Metallurgy Association (EPMA), стр. 267-272, Prague, Чешская Республика, 2.10.05.
Ovcharenko VE, Psakhie SG, Lapshin OV, Savitskii AP. Influence of electronic radiation on resistance to wear of TiC-NiCr hard alloy at cutting steel. В Euro PM 2005: Powder Metallurgy Congress and Exhibition. Том 3. European Powder Metallurgy Association (EPMA). 2005. стр. 267-272
Ovcharenko, V. E. ; Psakhie, S. G. ; Lapshin, O. V. ; Savitskii, A. P. / Influence of electronic radiation on resistance to wear of TiC-NiCr hard alloy at cutting steel. Euro PM 2005: Powder Metallurgy Congress and Exhibition. Том 3 European Powder Metallurgy Association (EPMA), 2005. стр. 267-272
@inproceedings{8b802b07e4424591a4640191da8fe021,
title = "Influence of electronic radiation on resistance to wear of TiC-NiCr hard alloy at cutting steel",
abstract = "An experimental investigation into the effect of impulse electron-beam irradiation of the sintered TiC/NiCr hard alloy on its wear resistance while cutting steel was performed. The microstructure of the surface layer, surface roughness, and transverse rupture strength of the alloy were studied after irradiation. Changes in the microstructure and in the properties of the material were shown to be the result of the interaction of the carbide particles with the liquid metal binder under high rates of heating and cooling of the surface layer.",
author = "Ovcharenko, {V. E.} and Psakhie, {S. G.} and Lapshin, {O. V.} and Savitskii, {A. P.}",
year = "2005",
language = "English",
isbn = "9781899072187",
volume = "3",
pages = "267--272",
booktitle = "Euro PM 2005: Powder Metallurgy Congress and Exhibition",
publisher = "European Powder Metallurgy Association (EPMA)",

}

TY - GEN

T1 - Influence of electronic radiation on resistance to wear of TiC-NiCr hard alloy at cutting steel

AU - Ovcharenko, V. E.

AU - Psakhie, S. G.

AU - Lapshin, O. V.

AU - Savitskii, A. P.

PY - 2005

Y1 - 2005

N2 - An experimental investigation into the effect of impulse electron-beam irradiation of the sintered TiC/NiCr hard alloy on its wear resistance while cutting steel was performed. The microstructure of the surface layer, surface roughness, and transverse rupture strength of the alloy were studied after irradiation. Changes in the microstructure and in the properties of the material were shown to be the result of the interaction of the carbide particles with the liquid metal binder under high rates of heating and cooling of the surface layer.

AB - An experimental investigation into the effect of impulse electron-beam irradiation of the sintered TiC/NiCr hard alloy on its wear resistance while cutting steel was performed. The microstructure of the surface layer, surface roughness, and transverse rupture strength of the alloy were studied after irradiation. Changes in the microstructure and in the properties of the material were shown to be the result of the interaction of the carbide particles with the liquid metal binder under high rates of heating and cooling of the surface layer.

UR - http://www.scopus.com/inward/record.url?scp=57349185744&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=57349185744&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:57349185744

SN - 9781899072187

VL - 3

SP - 267

EP - 272

BT - Euro PM 2005: Powder Metallurgy Congress and Exhibition

PB - European Powder Metallurgy Association (EPMA)

ER -