Influence of binding composition on the structure and properties of steel work-pieces obtained by injection moulding

Результат исследований: Материалы для журналаСтатья

Выдержка

The paper presents the results of the research analyzing the influence of binding composition on the structure and properties of the stainless steel samples obtained by injection moulding technique. It have been determined the tailored composition of binding, which provides sufficient feedstock viscosity, low porosity of work-pieces, etc. Three binding compositions polypropylene and paraffin wax have been studied: 1:6, 1:2, 2:1, respectively. Stearic acid has been used as a SAS (surface active substance). The results have shown that the binding compositions between 1:6 and 1:2 polypropylene and paraffin wax provides sufficient viscosity feedstock, dimensional stability during debinding and sintering, and the high density of the final product.

Язык оригиналаАнглийский
Номер статьи012035
ЖурналIOP Conference Series: Materials Science and Engineering
Том175
Номер выпуска1
DOI
СостояниеОпубликовано - 15 фев 2017

Отпечаток

Steel
Injection molding
Paraffin waxes
Polypropylenes
Chemical analysis
Feedstocks
Viscosity
Stearic acid
Dimensional stability
Stainless Steel
Sintering
Stainless steel
Porosity

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Цитировать

Influence of binding composition on the structure and properties of steel work-pieces obtained by injection moulding. / Darenskaya, Elena Anatolievna; Vaulina, O. Yu; Myachin, Yu V.; Kul'kov, Sergey Nikolaevich.

В: IOP Conference Series: Materials Science and Engineering, Том 175, № 1, 012035, 15.02.2017.

Результат исследований: Материалы для журналаСтатья

@article{512303f68e0d45cb92924026bfc828dd,
title = "Influence of binding composition on the structure and properties of steel work-pieces obtained by injection moulding",
abstract = "The paper presents the results of the research analyzing the influence of binding composition on the structure and properties of the stainless steel samples obtained by injection moulding technique. It have been determined the tailored composition of binding, which provides sufficient feedstock viscosity, low porosity of work-pieces, etc. Three binding compositions polypropylene and paraffin wax have been studied: 1:6, 1:2, 2:1, respectively. Stearic acid has been used as a SAS (surface active substance). The results have shown that the binding compositions between 1:6 and 1:2 polypropylene and paraffin wax provides sufficient viscosity feedstock, dimensional stability during debinding and sintering, and the high density of the final product.",
author = "Darenskaya, {Elena Anatolievna} and Vaulina, {O. Yu} and Myachin, {Yu V.} and Kul'kov, {Sergey Nikolaevich}",
year = "2017",
month = "2",
day = "15",
doi = "10.1088/1757-899X/175/1/012035",
language = "English",
volume = "175",
journal = "IOP Conference Series: Materials Science and Engineering",
issn = "1757-8981",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - Influence of binding composition on the structure and properties of steel work-pieces obtained by injection moulding

AU - Darenskaya, Elena Anatolievna

AU - Vaulina, O. Yu

AU - Myachin, Yu V.

AU - Kul'kov, Sergey Nikolaevich

PY - 2017/2/15

Y1 - 2017/2/15

N2 - The paper presents the results of the research analyzing the influence of binding composition on the structure and properties of the stainless steel samples obtained by injection moulding technique. It have been determined the tailored composition of binding, which provides sufficient feedstock viscosity, low porosity of work-pieces, etc. Three binding compositions polypropylene and paraffin wax have been studied: 1:6, 1:2, 2:1, respectively. Stearic acid has been used as a SAS (surface active substance). The results have shown that the binding compositions between 1:6 and 1:2 polypropylene and paraffin wax provides sufficient viscosity feedstock, dimensional stability during debinding and sintering, and the high density of the final product.

AB - The paper presents the results of the research analyzing the influence of binding composition on the structure and properties of the stainless steel samples obtained by injection moulding technique. It have been determined the tailored composition of binding, which provides sufficient feedstock viscosity, low porosity of work-pieces, etc. Three binding compositions polypropylene and paraffin wax have been studied: 1:6, 1:2, 2:1, respectively. Stearic acid has been used as a SAS (surface active substance). The results have shown that the binding compositions between 1:6 and 1:2 polypropylene and paraffin wax provides sufficient viscosity feedstock, dimensional stability during debinding and sintering, and the high density of the final product.

UR - http://www.scopus.com/inward/record.url?scp=85016476930&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85016476930&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/175/1/012035

DO - 10.1088/1757-899X/175/1/012035

M3 - Article

AN - SCOPUS:85016476930

VL - 175

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

SN - 1757-8981

IS - 1

M1 - 012035

ER -