Influence irradiation argon ion SnO2 on optical and electrical characteristics

O. Asainov, S. Umnov, V. Temenkov

Результат исследований: Материалы для журналаСтатья

1 цитирование (Scopus)

Выдержка

Tin oxide in the form of films has been deposited by reactive magnetron sputtering on glass substrates a room temperature. Process was carried out in such mode when the deposited films were conductive. The deposited films were irradiated with argon ions. Have been studied happening at that the changes optical and electric properties of films. Have been investigated optical properties of films in the range of 300-1100 nanometers by means of photometry. For research structure of films was used the x-ray diffractometry. Diffractometric researches have shown that the films deposited on a substrate have crystal structure from shares of a quasicrystal phase and after influence of argon ions she completely became quasicrystal. It is established that change transmission of a film correlates with change her electric resistance. Average value transmission in the range of 380-1100 nanometers as well as the electric resistance of a film with growth of irradiation time increases to the values exceeding initial. At the same time at irradiation time ∼ 13,2 sec. are observed their slight decrease. To this value of irradiation time there corresponds the minimum value of electric resistance and transmission films. Change of transmission coefficient correlates with change of surface resistance.

Язык оригиналаАнглийский
Номер статьи012007
ЖурналIOP Conference Series: Materials Science and Engineering
Том168
Номер выпуска1
DOI
СостояниеОпубликовано - 7 фев 2017
Событие12th International Conference Radiation-Thermal Effects and Processes in Inorganic Materials - Tomsk, Российская Федерация
Продолжительность: 4 сен 201612 сен 2016

Отпечаток

Argon
Irradiation
Ions
Quasicrystals
Optical properties
Photometry
Surface resistance
Conductive films
Reactive sputtering
Substrates
Tin oxides
Magnetron sputtering
Electric properties
Crystal structure
X rays
Glass

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Цитировать

Influence irradiation argon ion SnO2 on optical and electrical characteristics. / Asainov, O.; Umnov, S.; Temenkov, V.

В: IOP Conference Series: Materials Science and Engineering, Том 168, № 1, 012007, 07.02.2017.

Результат исследований: Материалы для журналаСтатья

@article{436c5a4f3aa2453398adb4ff659470ef,
title = "Influence irradiation argon ion SnO2 on optical and electrical characteristics",
abstract = "Tin oxide in the form of films has been deposited by reactive magnetron sputtering on glass substrates a room temperature. Process was carried out in such mode when the deposited films were conductive. The deposited films were irradiated with argon ions. Have been studied happening at that the changes optical and electric properties of films. Have been investigated optical properties of films in the range of 300-1100 nanometers by means of photometry. For research structure of films was used the x-ray diffractometry. Diffractometric researches have shown that the films deposited on a substrate have crystal structure from shares of a quasicrystal phase and after influence of argon ions she completely became quasicrystal. It is established that change transmission of a film correlates with change her electric resistance. Average value transmission in the range of 380-1100 nanometers as well as the electric resistance of a film with growth of irradiation time increases to the values exceeding initial. At the same time at irradiation time ∼ 13,2 sec. are observed their slight decrease. To this value of irradiation time there corresponds the minimum value of electric resistance and transmission films. Change of transmission coefficient correlates with change of surface resistance.",
author = "O. Asainov and S. Umnov and V. Temenkov",
year = "2017",
month = "2",
day = "7",
doi = "10.1088/1757-899X/168/1/012007",
language = "English",
volume = "168",
journal = "IOP Conference Series: Materials Science and Engineering",
issn = "1757-8981",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - Influence irradiation argon ion SnO2 on optical and electrical characteristics

AU - Asainov, O.

AU - Umnov, S.

AU - Temenkov, V.

PY - 2017/2/7

Y1 - 2017/2/7

N2 - Tin oxide in the form of films has been deposited by reactive magnetron sputtering on glass substrates a room temperature. Process was carried out in such mode when the deposited films were conductive. The deposited films were irradiated with argon ions. Have been studied happening at that the changes optical and electric properties of films. Have been investigated optical properties of films in the range of 300-1100 nanometers by means of photometry. For research structure of films was used the x-ray diffractometry. Diffractometric researches have shown that the films deposited on a substrate have crystal structure from shares of a quasicrystal phase and after influence of argon ions she completely became quasicrystal. It is established that change transmission of a film correlates with change her electric resistance. Average value transmission in the range of 380-1100 nanometers as well as the electric resistance of a film with growth of irradiation time increases to the values exceeding initial. At the same time at irradiation time ∼ 13,2 sec. are observed their slight decrease. To this value of irradiation time there corresponds the minimum value of electric resistance and transmission films. Change of transmission coefficient correlates with change of surface resistance.

AB - Tin oxide in the form of films has been deposited by reactive magnetron sputtering on glass substrates a room temperature. Process was carried out in such mode when the deposited films were conductive. The deposited films were irradiated with argon ions. Have been studied happening at that the changes optical and electric properties of films. Have been investigated optical properties of films in the range of 300-1100 nanometers by means of photometry. For research structure of films was used the x-ray diffractometry. Diffractometric researches have shown that the films deposited on a substrate have crystal structure from shares of a quasicrystal phase and after influence of argon ions she completely became quasicrystal. It is established that change transmission of a film correlates with change her electric resistance. Average value transmission in the range of 380-1100 nanometers as well as the electric resistance of a film with growth of irradiation time increases to the values exceeding initial. At the same time at irradiation time ∼ 13,2 sec. are observed their slight decrease. To this value of irradiation time there corresponds the minimum value of electric resistance and transmission films. Change of transmission coefficient correlates with change of surface resistance.

UR - http://www.scopus.com/inward/record.url?scp=85014456377&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85014456377&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/168/1/012007

DO - 10.1088/1757-899X/168/1/012007

M3 - Article

AN - SCOPUS:85014456377

VL - 168

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

SN - 1757-8981

IS - 1

M1 - 012007

ER -