Increasing the economic efficiency of gasoline production: Reducing the quality giveaway and simulation of catalytic cracking and compounding

Vyacheslav Chuzlov, Galina Nazarova, Emiliya Ivanchina, Elena Ivashkina, Irena Dolganova, Anastasia Solopova

Результат исследований: Материалы для журналаСтатья

Выдержка

This paper presents a way to improve the efficiency of the gasoline production. The essence of the proposed approach lies in the successive stages of calculating and optimizing the processes of manufacturing mixing components, such as reformate, isomerizate, alkylate, catalytic cracking gasoline. The other important point is determining the optimal fuel compositions based on the information obtained from the previous stage about the hydrocarbon composition, physicochemical properties and volume develop blending components. This technique allows us to reduce the stock on the quality of commercial products due to the continuous determination of the composition and properties of the mixing components in terms of changes in the hydrocarbon composition of the processed raw materials and fluctuations in operating parameters of industrial equipment. It also allows adjusting the recipe of mixing of commercial gasoline in accordance with the requirements and the specified volume of finished products. The authors propose mathematical models of the reforming, isomerization and alkylation, however, in this paper, the stage of modeling the production of mixing components is presented on the example of the catalytic cracking process, as it is most complex and large-tonnage technology for the production of motor gasoline components.

Язык оригиналаАнглийский
Номер статьи106139
ЖурналFuel Processing Technology
Том196
DOI
СостояниеОпубликовано - 15 дек 2019

Отпечаток

Catalytic cracking
Gasoline
Economics
Hydrocarbons
Chemical analysis
Alkylation
Reforming reactions
Isomerization
Raw materials
Mathematical models

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Fuel Technology
  • Energy Engineering and Power Technology

Цитировать

Increasing the economic efficiency of gasoline production : Reducing the quality giveaway and simulation of catalytic cracking and compounding. / Chuzlov, Vyacheslav; Nazarova, Galina; Ivanchina, Emiliya; Ivashkina, Elena; Dolganova, Irena; Solopova, Anastasia.

В: Fuel Processing Technology, Том 196, 106139, 15.12.2019.

Результат исследований: Материалы для журналаСтатья

@article{51326a7f67b4495ca1c08494f1e61686,
title = "Increasing the economic efficiency of gasoline production: Reducing the quality giveaway and simulation of catalytic cracking and compounding",
abstract = "This paper presents a way to improve the efficiency of the gasoline production. The essence of the proposed approach lies in the successive stages of calculating and optimizing the processes of manufacturing mixing components, such as reformate, isomerizate, alkylate, catalytic cracking gasoline. The other important point is determining the optimal fuel compositions based on the information obtained from the previous stage about the hydrocarbon composition, physicochemical properties and volume develop blending components. This technique allows us to reduce the stock on the quality of commercial products due to the continuous determination of the composition and properties of the mixing components in terms of changes in the hydrocarbon composition of the processed raw materials and fluctuations in operating parameters of industrial equipment. It also allows adjusting the recipe of mixing of commercial gasoline in accordance with the requirements and the specified volume of finished products. The authors propose mathematical models of the reforming, isomerization and alkylation, however, in this paper, the stage of modeling the production of mixing components is presented on the example of the catalytic cracking process, as it is most complex and large-tonnage technology for the production of motor gasoline components.",
keywords = "Catalytic cracking, Compounding, Efficiency upgrading, Feedstock composition, Forecasting modeling, Gasoline",
author = "Vyacheslav Chuzlov and Galina Nazarova and Emiliya Ivanchina and Elena Ivashkina and Irena Dolganova and Anastasia Solopova",
year = "2019",
month = "12",
day = "15",
doi = "10.1016/j.fuproc.2019.106139",
language = "English",
volume = "196",
journal = "Fuel Processing Technology",
issn = "0378-3820",
publisher = "Elsevier",

}

TY - JOUR

T1 - Increasing the economic efficiency of gasoline production

T2 - Reducing the quality giveaway and simulation of catalytic cracking and compounding

AU - Chuzlov, Vyacheslav

AU - Nazarova, Galina

AU - Ivanchina, Emiliya

AU - Ivashkina, Elena

AU - Dolganova, Irena

AU - Solopova, Anastasia

PY - 2019/12/15

Y1 - 2019/12/15

N2 - This paper presents a way to improve the efficiency of the gasoline production. The essence of the proposed approach lies in the successive stages of calculating and optimizing the processes of manufacturing mixing components, such as reformate, isomerizate, alkylate, catalytic cracking gasoline. The other important point is determining the optimal fuel compositions based on the information obtained from the previous stage about the hydrocarbon composition, physicochemical properties and volume develop blending components. This technique allows us to reduce the stock on the quality of commercial products due to the continuous determination of the composition and properties of the mixing components in terms of changes in the hydrocarbon composition of the processed raw materials and fluctuations in operating parameters of industrial equipment. It also allows adjusting the recipe of mixing of commercial gasoline in accordance with the requirements and the specified volume of finished products. The authors propose mathematical models of the reforming, isomerization and alkylation, however, in this paper, the stage of modeling the production of mixing components is presented on the example of the catalytic cracking process, as it is most complex and large-tonnage technology for the production of motor gasoline components.

AB - This paper presents a way to improve the efficiency of the gasoline production. The essence of the proposed approach lies in the successive stages of calculating and optimizing the processes of manufacturing mixing components, such as reformate, isomerizate, alkylate, catalytic cracking gasoline. The other important point is determining the optimal fuel compositions based on the information obtained from the previous stage about the hydrocarbon composition, physicochemical properties and volume develop blending components. This technique allows us to reduce the stock on the quality of commercial products due to the continuous determination of the composition and properties of the mixing components in terms of changes in the hydrocarbon composition of the processed raw materials and fluctuations in operating parameters of industrial equipment. It also allows adjusting the recipe of mixing of commercial gasoline in accordance with the requirements and the specified volume of finished products. The authors propose mathematical models of the reforming, isomerization and alkylation, however, in this paper, the stage of modeling the production of mixing components is presented on the example of the catalytic cracking process, as it is most complex and large-tonnage technology for the production of motor gasoline components.

KW - Catalytic cracking

KW - Compounding

KW - Efficiency upgrading

KW - Feedstock composition

KW - Forecasting modeling

KW - Gasoline

UR - http://www.scopus.com/inward/record.url?scp=85070877954&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85070877954&partnerID=8YFLogxK

U2 - 10.1016/j.fuproc.2019.106139

DO - 10.1016/j.fuproc.2019.106139

M3 - Article

AN - SCOPUS:85070877954

VL - 196

JO - Fuel Processing Technology

JF - Fuel Processing Technology

SN - 0378-3820

M1 - 106139

ER -