Increasing Strength and Operational Reliability of Fixed Joints of Tubes by MMA Welding

D. P. Il'Yaschenko, D. A. Chinakhov, V. I. Danilov, G. V. Schlyakhova, Y. M. Gotovschik

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

14 Цитирования (Scopus)

Выдержка

This paper presents peculiar properties of structure formation, phase and chemical composition while welding of low-alloy steel 09MnSi2-l depending on the dynamic characteristics of power sources of different types. Proper selection of power sources enables to decrease burning of alloy elements in metal of weld (Mn by 14% and Si by 17% of the weight ratio), to obtain more homogenous structure of deposited metal, to reduce length of heat-affected zone by 50% and to improve impact strength by 4-9%.

Язык оригиналаАнглийский
Название основной публикацииIOP Conference Series: Materials Science and Engineering
ИздательInstitute of Physics Publishing
Том91
Издание1
DOI
СостояниеОпубликовано - 14 сен 2015
Событие6th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering - Yurga, Российская Федерация
Продолжительность: 21 мая 201523 мая 2015

Другое

Другое6th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering
СтранаРоссийская Федерация
ГородYurga
Период21.5.1523.5.15

Отпечаток

Welding
Metals
Heat affected zone
Impact strength
High strength steel
Chemical elements
Welds
Chemical analysis

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Цитировать

Il'Yaschenko, D. P., Chinakhov, D. A., Danilov, V. I., Schlyakhova, G. V., & Gotovschik, Y. M. (2015). Increasing Strength and Operational Reliability of Fixed Joints of Tubes by MMA Welding. В IOP Conference Series: Materials Science and Engineering (1 ред., Том 91). [012007] Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/91/1/012007

Increasing Strength and Operational Reliability of Fixed Joints of Tubes by MMA Welding. / Il'Yaschenko, D. P.; Chinakhov, D. A.; Danilov, V. I.; Schlyakhova, G. V.; Gotovschik, Y. M.

IOP Conference Series: Materials Science and Engineering. Том 91 1. ред. Institute of Physics Publishing, 2015. 012007.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Il'Yaschenko, DP, Chinakhov, DA, Danilov, VI, Schlyakhova, GV & Gotovschik, YM 2015, Increasing Strength and Operational Reliability of Fixed Joints of Tubes by MMA Welding. в IOP Conference Series: Materials Science and Engineering. 1 ред., том. 91, 012007, Institute of Physics Publishing, Yurga, Российская Федерация, 21.5.15. https://doi.org/10.1088/1757-899X/91/1/012007
Il'Yaschenko DP, Chinakhov DA, Danilov VI, Schlyakhova GV, Gotovschik YM. Increasing Strength and Operational Reliability of Fixed Joints of Tubes by MMA Welding. В IOP Conference Series: Materials Science and Engineering. 1 ред. Том 91. Institute of Physics Publishing. 2015. 012007 https://doi.org/10.1088/1757-899X/91/1/012007
Il'Yaschenko, D. P. ; Chinakhov, D. A. ; Danilov, V. I. ; Schlyakhova, G. V. ; Gotovschik, Y. M. / Increasing Strength and Operational Reliability of Fixed Joints of Tubes by MMA Welding. IOP Conference Series: Materials Science and Engineering. Том 91 1. ред. Institute of Physics Publishing, 2015.
@inproceedings{495668a6afd9438091852f08dccfa17d,
title = "Increasing Strength and Operational Reliability of Fixed Joints of Tubes by MMA Welding",
abstract = "This paper presents peculiar properties of structure formation, phase and chemical composition while welding of low-alloy steel 09MnSi2-l depending on the dynamic characteristics of power sources of different types. Proper selection of power sources enables to decrease burning of alloy elements in metal of weld (Mn by 14{\%} and Si by 17{\%} of the weight ratio), to obtain more homogenous structure of deposited metal, to reduce length of heat-affected zone by 50{\%} and to improve impact strength by 4-9{\%}.",
author = "Il'Yaschenko, {D. P.} and Chinakhov, {D. A.} and Danilov, {V. I.} and Schlyakhova, {G. V.} and Gotovschik, {Y. M.}",
year = "2015",
month = "9",
day = "14",
doi = "10.1088/1757-899X/91/1/012007",
language = "English",
volume = "91",
booktitle = "IOP Conference Series: Materials Science and Engineering",
publisher = "Institute of Physics Publishing",
edition = "1",

}

TY - GEN

T1 - Increasing Strength and Operational Reliability of Fixed Joints of Tubes by MMA Welding

AU - Il'Yaschenko, D. P.

AU - Chinakhov, D. A.

AU - Danilov, V. I.

AU - Schlyakhova, G. V.

AU - Gotovschik, Y. M.

PY - 2015/9/14

Y1 - 2015/9/14

N2 - This paper presents peculiar properties of structure formation, phase and chemical composition while welding of low-alloy steel 09MnSi2-l depending on the dynamic characteristics of power sources of different types. Proper selection of power sources enables to decrease burning of alloy elements in metal of weld (Mn by 14% and Si by 17% of the weight ratio), to obtain more homogenous structure of deposited metal, to reduce length of heat-affected zone by 50% and to improve impact strength by 4-9%.

AB - This paper presents peculiar properties of structure formation, phase and chemical composition while welding of low-alloy steel 09MnSi2-l depending on the dynamic characteristics of power sources of different types. Proper selection of power sources enables to decrease burning of alloy elements in metal of weld (Mn by 14% and Si by 17% of the weight ratio), to obtain more homogenous structure of deposited metal, to reduce length of heat-affected zone by 50% and to improve impact strength by 4-9%.

UR - http://www.scopus.com/inward/record.url?scp=84946896586&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84946896586&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/91/1/012007

DO - 10.1088/1757-899X/91/1/012007

M3 - Conference contribution

AN - SCOPUS:84946896586

VL - 91

BT - IOP Conference Series: Materials Science and Engineering

PB - Institute of Physics Publishing

ER -