Increasing common-mode rejection ratio based on the voltage follower

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

The paper presents certain procedures oriented towards the decrease of the uncertainty of measuring the small differential signal against a large common-mode signal. The technical implementation of the tracking symmetrical power supply is suggested for the instrumentation amplifier based on the voltage follower that allows increasing the common mode rejection ratio and input impedance and decreasing the cable capacitance.

Язык оригиналаАнглийский
Название основной публикации2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings
ИздательInstitute of Electrical and Electronics Engineers Inc.
ISBN (электронное издание)9781467383837
DOI
СостояниеОпубликовано - 14 июн 2016
Событие2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Moscow, Российская Федерация
Продолжительность: 12 мая 201614 мая 2016

Конференция

Конференция2016 International Siberian Conference on Control and Communications, SIBCON 2016
СтранаРоссийская Федерация
ГородMoscow
Период12.5.1614.5.16

    Fingerprint

ASJC Scopus subject areas

  • Signal Processing
  • Control and Systems Engineering
  • Electrical and Electronic Engineering
  • Modelling and Simulation
  • Computer Networks and Communications

Цитировать

Baranov, P. F., Tsimbalist, E. I., Borikov, V., & Pisarenko, J. (2016). Increasing common-mode rejection ratio based on the voltage follower. В 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings [7491843] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SIBCON.2016.7491843