Increased ultraviolet reflectivity of magnetron deposited Al films

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Выдержка

Magnetron sputtering systems are widely used in deposition technology for coatings of different functionality. Optical properties of aluminum coatings deposited by the original method have been investigated in this paper. Film deposition was performed using the planar magnetron with aluminum cathode (99.995%) on the installation for magnetron coating deposition. Medium frequency supply source was used in the installation. The working gas was argon. The working pressure in the chamber upon sputtering was 0.15 Pa. The Halltype source of Ar ions was used in a number of experiments. The experimental technique was the following. One part of glass samples was deposited by aluminum films using a conventional method. The thickness was determined using AvaSpec USB2 spectrometer. Another part of samples was deposited also by aluminum films with the same thickness, but using the original method. The reflection factor of obtained samples from glass was measured on SF-256 spectrophotometer. Photometric studies showed that samples with film aluminum coatings have increased reflection factor in the ultraviolet area in comparison with the films that were deposited using a conventional method. In our opinion, the reason for the increased reflection factor can be due to the changes that occurred in the coating structure. Electron-microscopic studies (SM 12, "Philips") and x-ray diffractometric studies (Shimadzu XRD6000, "Shimadzu") of deposited coatings have been performed to check this supposition.

Язык оригиналаАнглийский
Название основной публикацииProceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012
DOI
СостояниеОпубликовано - 2012
Событие2012 7th International Forum on Strategic Technology, IFOST 2012 - Tomsk, Российская Федерация
Продолжительность: 18 сен 201221 сен 2012

Конференция

Конференция2012 7th International Forum on Strategic Technology, IFOST 2012
СтранаРоссийская Федерация
ГородTomsk
Период18.9.1221.9.12

Отпечаток

Aluminum coatings
Coatings
Aluminum
Glass
Spectrophotometers
Magnetron sputtering
Sputtering
Spectrometers
Argon
Cathodes
Optical properties
X rays
Electrons
Ions
Gases
Experiments
Factors

ASJC Scopus subject areas

  • Management of Technology and Innovation

Цитировать

Asainov, OK., & Umnov, S. (2012). Increased ultraviolet reflectivity of magnetron deposited Al films. В Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012 [6357554] https://doi.org/10.1109/IFOST.2012.6357554

Increased ultraviolet reflectivity of magnetron deposited Al films. / Asainov, Oleg Khaidarovich; Umnov, Sergey.

Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012. 6357554.

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Asainov, OK & Umnov, S 2012, Increased ultraviolet reflectivity of magnetron deposited Al films. в Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012., 6357554, Tomsk, Российская Федерация, 18.9.12. https://doi.org/10.1109/IFOST.2012.6357554
Asainov OK, Umnov S. Increased ultraviolet reflectivity of magnetron deposited Al films. В Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012. 6357554 https://doi.org/10.1109/IFOST.2012.6357554
Asainov, Oleg Khaidarovich ; Umnov, Sergey. / Increased ultraviolet reflectivity of magnetron deposited Al films. Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012. 2012.
@inproceedings{46d80ba3fbcb4e7a896e77a8eac4bb6c,
title = "Increased ultraviolet reflectivity of magnetron deposited Al films",
abstract = "Magnetron sputtering systems are widely used in deposition technology for coatings of different functionality. Optical properties of aluminum coatings deposited by the original method have been investigated in this paper. Film deposition was performed using the planar magnetron with aluminum cathode (99.995{\%}) on the installation for magnetron coating deposition. Medium frequency supply source was used in the installation. The working gas was argon. The working pressure in the chamber upon sputtering was 0.15 Pa. The Halltype source of Ar ions was used in a number of experiments. The experimental technique was the following. One part of glass samples was deposited by aluminum films using a conventional method. The thickness was determined using AvaSpec USB2 spectrometer. Another part of samples was deposited also by aluminum films with the same thickness, but using the original method. The reflection factor of obtained samples from glass was measured on SF-256 spectrophotometer. Photometric studies showed that samples with film aluminum coatings have increased reflection factor in the ultraviolet area in comparison with the films that were deposited using a conventional method. In our opinion, the reason for the increased reflection factor can be due to the changes that occurred in the coating structure. Electron-microscopic studies (SM 12, {"}Philips{"}) and x-ray diffractometric studies (Shimadzu XRD6000, {"}Shimadzu{"}) of deposited coatings have been performed to check this supposition.",
keywords = "magnetron sputtering, reflection coefficient Al",
author = "Oleg Khaidarovich Asainov and Sergey Umnov",
year = "2012",
doi = "10.1109/IFOST.2012.6357554",
language = "English",
isbn = "9781467317702",
booktitle = "Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012",

}

TY - GEN

T1 - Increased ultraviolet reflectivity of magnetron deposited Al films

AU - Asainov, Oleg Khaidarovich

AU - Umnov, Sergey

PY - 2012

Y1 - 2012

N2 - Magnetron sputtering systems are widely used in deposition technology for coatings of different functionality. Optical properties of aluminum coatings deposited by the original method have been investigated in this paper. Film deposition was performed using the planar magnetron with aluminum cathode (99.995%) on the installation for magnetron coating deposition. Medium frequency supply source was used in the installation. The working gas was argon. The working pressure in the chamber upon sputtering was 0.15 Pa. The Halltype source of Ar ions was used in a number of experiments. The experimental technique was the following. One part of glass samples was deposited by aluminum films using a conventional method. The thickness was determined using AvaSpec USB2 spectrometer. Another part of samples was deposited also by aluminum films with the same thickness, but using the original method. The reflection factor of obtained samples from glass was measured on SF-256 spectrophotometer. Photometric studies showed that samples with film aluminum coatings have increased reflection factor in the ultraviolet area in comparison with the films that were deposited using a conventional method. In our opinion, the reason for the increased reflection factor can be due to the changes that occurred in the coating structure. Electron-microscopic studies (SM 12, "Philips") and x-ray diffractometric studies (Shimadzu XRD6000, "Shimadzu") of deposited coatings have been performed to check this supposition.

AB - Magnetron sputtering systems are widely used in deposition technology for coatings of different functionality. Optical properties of aluminum coatings deposited by the original method have been investigated in this paper. Film deposition was performed using the planar magnetron with aluminum cathode (99.995%) on the installation for magnetron coating deposition. Medium frequency supply source was used in the installation. The working gas was argon. The working pressure in the chamber upon sputtering was 0.15 Pa. The Halltype source of Ar ions was used in a number of experiments. The experimental technique was the following. One part of glass samples was deposited by aluminum films using a conventional method. The thickness was determined using AvaSpec USB2 spectrometer. Another part of samples was deposited also by aluminum films with the same thickness, but using the original method. The reflection factor of obtained samples from glass was measured on SF-256 spectrophotometer. Photometric studies showed that samples with film aluminum coatings have increased reflection factor in the ultraviolet area in comparison with the films that were deposited using a conventional method. In our opinion, the reason for the increased reflection factor can be due to the changes that occurred in the coating structure. Electron-microscopic studies (SM 12, "Philips") and x-ray diffractometric studies (Shimadzu XRD6000, "Shimadzu") of deposited coatings have been performed to check this supposition.

KW - magnetron sputtering

KW - reflection coefficient Al

UR - http://www.scopus.com/inward/record.url?scp=84871829005&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84871829005&partnerID=8YFLogxK

U2 - 10.1109/IFOST.2012.6357554

DO - 10.1109/IFOST.2012.6357554

M3 - Conference contribution

AN - SCOPUS:84871829005

SN - 9781467317702

BT - Proceedings - 2012 7th International Forum on Strategic Technology, IFOST 2012

ER -