Improving mechanical properties of wire-based EBAM Ti-6Al-4V parts by adding TiC powders

Alexey V. Panin, Marina S. Kazachenok, Elena A. Sinyakova, Artem O. Builuk, Sergey A. Martynov, Sergey V. Panin, Filippo Berto

Результат исследований: Материалы для журналаСтатьярецензирование

Аннотация

This paper addresses the problem of enlarging the strength of Ti-6Al-4V titanium parts fabricated by wire-based electron-beam additive manufacturing (EBAM) technology. The investigations on microstructure and phase composition of wire-based EBAM Ti-6Al-4V samples as well the as EBAM TiCx/Ti-6Al-4V ones fabricated by electron beam melting of titanium Ti-6Al-4V wire with simultaneous supply of TiC powder were performed. It is shown that adding of TiC powder into a molten pool significantly affects the microstructure and volume fraction of retained β phase in the EBAM-built parts. The main conclusion made postulates that the combination of wire feeding–based EBAM and direct metal deposition technology, which utilizes a feed nozzle to supply the ceramic powder into a molten pool, provides an ample opportunity to produce EBAM TiCx/Ti-6Al-4V samples with increased microhardness and tensile strength.

Язык оригиналаАнглийский
Номер статьиe136
ЖурналMaterial Design and Processing Communications
Том3
Номер выпуска1
DOI
СостояниеОпубликовано - фев 2021

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Mechanical Engineering
  • Mechanics of Materials

Fingerprint Подробные сведения о темах исследования «Improving mechanical properties of wire-based EBAM Ti-6Al-4V parts by adding TiC powders». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать