Аннотация

An electrical circuit is described and the construction of the high-current pulse generator is represented. The generator has the following parameters: output voltage is ∼ 20kV, current is ∼ 100kA, it operates in a nanosecond range of time (∼ 300ns), the pulse repetition rate is up to 10Hz in a continuous mode, and it is intended for plasma focus supply. The generator is based on the capacitive storage discharge through toroidal pulse transformer to electrodes of the plasma focus. A low-inductance multichannel spark-gap is used as a switch in the generator. The stored energy of the generator is ∼ 600J. The first results of the experimental operation of the generator with plasma focus are given.

Язык оригиналаАнглийский
Заголовок главной публикацииDigest of Technical Papers-IEEE International Pulsed Power Conference
Страницы923-926
Количество страниц4
DOI
Статус публикацииОпубликовано - 2011
Событие18th IEEE International Pulsed Power Conference, PPC 2011 - Chicago, IL, Соединенные Штаты Америки
Длительность: 19 июн 201123 июн 2011

Другое

Другое18th IEEE International Pulsed Power Conference, PPC 2011
СтранаСоединенные Штаты Америки
ГородChicago, IL
Период19.6.1123.6.11

    Fingerprint

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Energy Engineering and Power Technology

Цитировать

Nashilevskiy, AVL., Kanaev, G. G., Krauz, V. I., Myalton, V. V., Remnev, G. E., & Vinogradov, V. P. (2011). High-current pulse generator for plasma focus. В Digest of Technical Papers-IEEE International Pulsed Power Conference (стр. 923-926). [6191540] https://doi.org/10.1109/PPC.2011.6191540