### Выдержка

To perform calculations of disk inductor generator at active capacitive duty and to correlate generator and load parameters for receiving maximum specific energetic indices it is essential to consider some important factors affecting generator characteristics. The calculation is carried out taking into account thermal limitations, actual inductance change curves received by solving field problems as the shape of inductance change curves influences generator characteristics. Heat calculations of inductor generator are of practical use when dealing with high voltage. Thermal limitations at continuous generator duty are considered to be important factors determining limiting indices concerning generator specific power. In doing so the main factor limiting generated power in the load is the temperature of generator winding insulation. Using simplified mathematical models on the basis of thermal equivalent circuit is a preferential calculation method of generator operating temperatures. It should be pointed out that thermal calculations are usually made along with aerodynamic and ventilation calculations of electrical machine cooling system to determine the shifting rate of the cooling flow. To increase the intensity of heat branching from the heated generator elements, a centrifugal ventilator with radial blades is fixed on the shaft. Heating temperature relation of the designed inductor generator elements before stable duty is settled is of exponential character and is determined by two main parameters-stable temperature and time constant of heating.

Язык оригинала | Английский |
---|---|

Название основной публикации | Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000 |

Издатель | Institute of Electrical and Electronics Engineers Inc. |

Страницы | 170-172 |

Число страниц | 3 |

ISBN (печатное издание) | 0780357892, 9780780357891 |

DOI | |

Состояние | Опубликовано - 2000 |

Событие | 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000 - Tomsk, Российская Федерация Продолжительность: 28 фев 2000 → 3 мар 2000 |

### Другое

Другое | 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000 |
---|---|

Страна | Российская Федерация |

Город | Tomsk |

Период | 28.2.00 → 3.3.00 |

### Отпечаток

### ASJC Scopus subject areas

- Engineering(all)

### Цитировать

*Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000*(стр. 170-172). [896103] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SPCMTT.2000.896103

**Heating and cooling of disk inductor generator.** / Chuchalin, A. I.; Muravlyov, I. O.; Safyannikov, I. A.

Результат исследований: Материалы для книги/типы отчетов › Материалы для конференции

*Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000.*, 896103, Institute of Electrical and Electronics Engineers Inc., стр. 170-172, 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000, Tomsk, Российская Федерация, 28.2.00. https://doi.org/10.1109/SPCMTT.2000.896103

}

TY - GEN

T1 - Heating and cooling of disk inductor generator

AU - Chuchalin, A. I.

AU - Muravlyov, I. O.

AU - Safyannikov, I. A.

PY - 2000

Y1 - 2000

N2 - To perform calculations of disk inductor generator at active capacitive duty and to correlate generator and load parameters for receiving maximum specific energetic indices it is essential to consider some important factors affecting generator characteristics. The calculation is carried out taking into account thermal limitations, actual inductance change curves received by solving field problems as the shape of inductance change curves influences generator characteristics. Heat calculations of inductor generator are of practical use when dealing with high voltage. Thermal limitations at continuous generator duty are considered to be important factors determining limiting indices concerning generator specific power. In doing so the main factor limiting generated power in the load is the temperature of generator winding insulation. Using simplified mathematical models on the basis of thermal equivalent circuit is a preferential calculation method of generator operating temperatures. It should be pointed out that thermal calculations are usually made along with aerodynamic and ventilation calculations of electrical machine cooling system to determine the shifting rate of the cooling flow. To increase the intensity of heat branching from the heated generator elements, a centrifugal ventilator with radial blades is fixed on the shaft. Heating temperature relation of the designed inductor generator elements before stable duty is settled is of exponential character and is determined by two main parameters-stable temperature and time constant of heating.

AB - To perform calculations of disk inductor generator at active capacitive duty and to correlate generator and load parameters for receiving maximum specific energetic indices it is essential to consider some important factors affecting generator characteristics. The calculation is carried out taking into account thermal limitations, actual inductance change curves received by solving field problems as the shape of inductance change curves influences generator characteristics. Heat calculations of inductor generator are of practical use when dealing with high voltage. Thermal limitations at continuous generator duty are considered to be important factors determining limiting indices concerning generator specific power. In doing so the main factor limiting generated power in the load is the temperature of generator winding insulation. Using simplified mathematical models on the basis of thermal equivalent circuit is a preferential calculation method of generator operating temperatures. It should be pointed out that thermal calculations are usually made along with aerodynamic and ventilation calculations of electrical machine cooling system to determine the shifting rate of the cooling flow. To increase the intensity of heat branching from the heated generator elements, a centrifugal ventilator with radial blades is fixed on the shaft. Heating temperature relation of the designed inductor generator elements before stable duty is settled is of exponential character and is determined by two main parameters-stable temperature and time constant of heating.

UR - http://www.scopus.com/inward/record.url?scp=84952889338&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84952889338&partnerID=8YFLogxK

U2 - 10.1109/SPCMTT.2000.896103

DO - 10.1109/SPCMTT.2000.896103

M3 - Conference contribution

AN - SCOPUS:84952889338

SN - 0780357892

SN - 9780780357891

SP - 170

EP - 172

BT - Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000

PB - Institute of Electrical and Electronics Engineers Inc.

ER -