Heat treatment of the Ti-6Al-4V alloy manufactured by electron beam melting

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

In this study, the effect of additional heat treatment on the microstructure and mechanical properties of the titanium Ti-6Al-4V alloy produced by the method of electron beam melting was studied. It has been established that additional heat treatment of samples allows reducing the friction coefficient and decreasing internal stresses in the material. At the same time, a decrease in microhardness, as well as the strength and plastic characteristics of EBM Ti-6Al-4V alloy, is observed. Simultaneously, heat treatment leads to a reduction in the rate of hydrogen accumulation by EBM Ti-6Al-4V alloy during saturation from a gaseous medium.

Язык оригиналаАнглийский
Название основной публикацииProceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019
РедакторыVictor E. Panin, Sergey G. Psakhie, Vasily M. Fomin
ИздательAmerican Institute of Physics Inc.
ISBN (электронное издание)9780735419124
DOI
СостояниеОпубликовано - 19 ноя 2019
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 - Tomsk, Российская Федерация
Продолжительность: 1 окт 20195 окт 2019

Серия публикаций

НазваниеAIP Conference Proceedings
Том2167
ISSN (печатное издание)0094-243X
ISSN (электронное издание)1551-7616

Конференция

КонференцияInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019
СтранаРоссийская Федерация
ГородTomsk
Период1.10.195.10.19

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Heat treatment of the Ti-6Al-4V alloy manufactured by electron beam melting». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Pushilina, N. S., Stepanova, E. N., Kudiiarov, V. N., Laptev, R. S., & Syrtanov, M. S. (2019). Heat treatment of the Ti-6Al-4V alloy manufactured by electron beam melting. В V. E. Panin, S. G. Psakhie, & V. M. Fomin (Ред.), Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 [020290] (AIP Conference Proceedings; Том 2167). American Institute of Physics Inc.. https://doi.org/10.1063/1.5132157