Hardness and abrasive wear resistance of electron beam coatings cladded by using of "tiB-titanium matrix" composite powders

E. N. Korosteleva, G. A. Pribytkov, V. V. Korzhova, M. G. Krinitcyn, I. A. Firsina

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

The paper describes the structure, hardness and wear resistance of electron beam coatings cladded by using of "TiB-titanium binder" composite powders. The powders have been synthesized from titanium and boron powder mixtures by self-propagating high temperature synthesis (SHS) at wave burning mode. The SHS powders were cladded on titanium substrate VT1-0 by electron beam surfacing. A phase composition and a structure of the SHS powders and of the cladded coatings were investigated by X-ray diffraction and optical microscopy. According to structure investigation and hardness measurement in the "coating-titanium base plate" transition zone an adhesion between the coating and the substrate was high. The maximum hardness increase of the coatings strengthened by needle-like titanium monoboride inclusions was 2.2 times and abrasive wear resistance - 3.7 times as compared with VTl-0 titanium.

Язык оригиналаАнглийский
Название основной публикацииProceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
РедакторыVasily M. Fomin, Victor E. Panin, Sergey G. Psakhie
ИздательAmerican Institute of Physics Inc.
Том2051
ISBN (электронное издание)9780735417779
DOI
СостояниеОпубликовано - 12 дек 2018
СобытиеInternational Symposium on Hierarchical Materials: Development and Applications for New Technologies and Reliable Structures 2018 - Tomsk, Российская Федерация
Продолжительность: 1 окт 20185 окт 2018

Конференция

КонференцияInternational Symposium on Hierarchical Materials: Development and Applications for New Technologies and Reliable Structures 2018
СтранаРоссийская Федерация
ГородTomsk
Период1.10.185.10.18

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Hardness and abrasive wear resistance of electron beam coatings cladded by using of "tiB-titanium matrix" composite powders». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Korosteleva, E. N., Pribytkov, G. A., Korzhova, V. V., Krinitcyn, M. G., & Firsina, I. A. (2018). Hardness and abrasive wear resistance of electron beam coatings cladded by using of "tiB-titanium matrix" composite powders. В V. M. Fomin, V. E. Panin, & S. G. Psakhie (Ред.), Proceedings of the Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures (Том 2051). [020137] American Institute of Physics Inc.. https://doi.org/10.1063/1.5083380