GEPI: A compact pulsed power driver for isentropic compression experiments and for non shocked high velocity flyer plates

G. Avrillaud, L. Courtois, J. Guerre, P. L. Hereil, F. Lassalle, F. Bayol, P. L'Eplattenier, B. Kovalchuk, E. Kumpjak, N. Zoi, A. Kim

    Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

    14 Цитирования (Scopus)

    Выдержка

    GEPI is a pulsed power generator developed by ITHPP for Centre d'Etudes de Gramat (CEG), devoted to Isentropic Compression Experiments in the 1Gpa to 100Gpa (1Mbar) range, and to non shocked high velocity flyer plates in the 100 m/s to 17km/s range. The main idea is to generate a high magnetic pressure in a strip line where the samples are located. The whole design is based on low inductance technologies. Depending on the load, the current reaches between 3 and 4 MA in 600 ns. The entire design has been done in a cost effective way and in order to achieve an easy-to-use capability. A description of the generator is shown and typical results of the studies led by CEG are presented. The matters of concern are equations of state, phase transitions and impact of high velocity flyer plates.

    Язык оригиналаАнглийский
    Название основной публикацииDigest of Technical Papers-IEEE International Pulsed Power Conference
    РедакторыM. Giesselmann, A. Neuber
    Страницы913-916
    Число страниц4
    СостояниеОпубликовано - 2003
    Событие14th IEEE International Pulsed Power Conference - Dallas, TX, Соединенные Штаты Америки
    Продолжительность: 15 июн 200318 июн 2003

    Другое

    Другое14th IEEE International Pulsed Power Conference
    СтранаСоединенные Штаты Америки
    ГородDallas, TX
    Период15.6.0318.6.03

    Отпечаток

    Strip telecommunication lines
    Equations of state
    Inductance
    Phase transitions
    Experiments
    Costs

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering

    Цитировать

    Avrillaud, G., Courtois, L., Guerre, J., Hereil, P. L., Lassalle, F., Bayol, F., ... Kim, A. (2003). GEPI: A compact pulsed power driver for isentropic compression experiments and for non shocked high velocity flyer plates. В M. Giesselmann, & A. Neuber (Ред.), Digest of Technical Papers-IEEE International Pulsed Power Conference (стр. 913-916)

    GEPI : A compact pulsed power driver for isentropic compression experiments and for non shocked high velocity flyer plates. / Avrillaud, G.; Courtois, L.; Guerre, J.; Hereil, P. L.; Lassalle, F.; Bayol, F.; L'Eplattenier, P.; Kovalchuk, B.; Kumpjak, E.; Zoi, N.; Kim, A.

    Digest of Technical Papers-IEEE International Pulsed Power Conference. ред. / M. Giesselmann; A. Neuber. 2003. стр. 913-916.

    Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

    Avrillaud, G, Courtois, L, Guerre, J, Hereil, PL, Lassalle, F, Bayol, F, L'Eplattenier, P, Kovalchuk, B, Kumpjak, E, Zoi, N & Kim, A 2003, GEPI: A compact pulsed power driver for isentropic compression experiments and for non shocked high velocity flyer plates. в M Giesselmann & A Neuber (ред.), Digest of Technical Papers-IEEE International Pulsed Power Conference. стр. 913-916, 14th IEEE International Pulsed Power Conference, Dallas, TX, Соединенные Штаты Америки, 15.6.03.
    Avrillaud G, Courtois L, Guerre J, Hereil PL, Lassalle F, Bayol F и соавт. GEPI: A compact pulsed power driver for isentropic compression experiments and for non shocked high velocity flyer plates. В Giesselmann M, Neuber A, редакторы, Digest of Technical Papers-IEEE International Pulsed Power Conference. 2003. стр. 913-916
    Avrillaud, G. ; Courtois, L. ; Guerre, J. ; Hereil, P. L. ; Lassalle, F. ; Bayol, F. ; L'Eplattenier, P. ; Kovalchuk, B. ; Kumpjak, E. ; Zoi, N. ; Kim, A. / GEPI : A compact pulsed power driver for isentropic compression experiments and for non shocked high velocity flyer plates. Digest of Technical Papers-IEEE International Pulsed Power Conference. редактор / M. Giesselmann ; A. Neuber. 2003. стр. 913-916
    @inproceedings{1a71a5ec2cae4e5484632e2e11c8ed51,
    title = "GEPI: A compact pulsed power driver for isentropic compression experiments and for non shocked high velocity flyer plates",
    abstract = "GEPI is a pulsed power generator developed by ITHPP for Centre d'Etudes de Gramat (CEG), devoted to Isentropic Compression Experiments in the 1Gpa to 100Gpa (1Mbar) range, and to non shocked high velocity flyer plates in the 100 m/s to 17km/s range. The main idea is to generate a high magnetic pressure in a strip line where the samples are located. The whole design is based on low inductance technologies. Depending on the load, the current reaches between 3 and 4 MA in 600 ns. The entire design has been done in a cost effective way and in order to achieve an easy-to-use capability. A description of the generator is shown and typical results of the studies led by CEG are presented. The matters of concern are equations of state, phase transitions and impact of high velocity flyer plates.",
    author = "G. Avrillaud and L. Courtois and J. Guerre and Hereil, {P. L.} and F. Lassalle and F. Bayol and P. L'Eplattenier and B. Kovalchuk and E. Kumpjak and N. Zoi and A. Kim",
    year = "2003",
    language = "English",
    pages = "913--916",
    editor = "M. Giesselmann and A. Neuber",
    booktitle = "Digest of Technical Papers-IEEE International Pulsed Power Conference",

    }

    TY - GEN

    T1 - GEPI

    T2 - A compact pulsed power driver for isentropic compression experiments and for non shocked high velocity flyer plates

    AU - Avrillaud, G.

    AU - Courtois, L.

    AU - Guerre, J.

    AU - Hereil, P. L.

    AU - Lassalle, F.

    AU - Bayol, F.

    AU - L'Eplattenier, P.

    AU - Kovalchuk, B.

    AU - Kumpjak, E.

    AU - Zoi, N.

    AU - Kim, A.

    PY - 2003

    Y1 - 2003

    N2 - GEPI is a pulsed power generator developed by ITHPP for Centre d'Etudes de Gramat (CEG), devoted to Isentropic Compression Experiments in the 1Gpa to 100Gpa (1Mbar) range, and to non shocked high velocity flyer plates in the 100 m/s to 17km/s range. The main idea is to generate a high magnetic pressure in a strip line where the samples are located. The whole design is based on low inductance technologies. Depending on the load, the current reaches between 3 and 4 MA in 600 ns. The entire design has been done in a cost effective way and in order to achieve an easy-to-use capability. A description of the generator is shown and typical results of the studies led by CEG are presented. The matters of concern are equations of state, phase transitions and impact of high velocity flyer plates.

    AB - GEPI is a pulsed power generator developed by ITHPP for Centre d'Etudes de Gramat (CEG), devoted to Isentropic Compression Experiments in the 1Gpa to 100Gpa (1Mbar) range, and to non shocked high velocity flyer plates in the 100 m/s to 17km/s range. The main idea is to generate a high magnetic pressure in a strip line where the samples are located. The whole design is based on low inductance technologies. Depending on the load, the current reaches between 3 and 4 MA in 600 ns. The entire design has been done in a cost effective way and in order to achieve an easy-to-use capability. A description of the generator is shown and typical results of the studies led by CEG are presented. The matters of concern are equations of state, phase transitions and impact of high velocity flyer plates.

    UR - http://www.scopus.com/inward/record.url?scp=10744227873&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=10744227873&partnerID=8YFLogxK

    M3 - Conference contribution

    AN - SCOPUS:10744227873

    SP - 913

    EP - 916

    BT - Digest of Technical Papers-IEEE International Pulsed Power Conference

    A2 - Giesselmann, M.

    A2 - Neuber, A.

    ER -