Friction stir processing on high carbon steel U12

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

Аннотация

Friction stir processing (FSP) of high carbon steel (U12) samples has been carried out using a milling machine and tools made of cemented tungsten carbide. The FSP tool has been made in the shape of 5×5×1.5 mm. The microstructural characterization of obtained stir zone and heat affected zone has been carried out. Microhardness at the level of 700 MPa has been obtained in the stir zone with microstructure consisting of large grains and cementitte network. This high-level of microhardness is explained by bainitic reaction developing from decarburization of austenitic grains during cementite network formation.

Язык оригиналаАнглийский
Название основной публикацииAdvanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
ИздательAmerican Institute of Physics Inc.
Том1683
ISBN (электронное издание)9780735413306
DOI
СостояниеОпубликовано - 27 окт 2015
СобытиеInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2015 - Tomsk, Российская Федерация
Продолжительность: 21 сен 201525 сен 2015

Конференция

КонференцияInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2015
СтранаРоссийская Федерация
ГородTomsk
Период21.9.1525.9.15

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Подробные сведения о темах исследования «Friction stir processing on high carbon steel U12». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать

    Tarasov, S. Y., Melnikov, A. G., & Rubtsov, V. E. (2015). Friction stir processing on high carbon steel U12. В Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures (Том 1683). [020229] American Institute of Physics Inc.. https://doi.org/10.1063/1.4932919