Friction and wear behavior of polydicyclopentadiene under dry sliding and boundary lubrication

Margarita K. Zamanova, Viorika I. Kucuk, Vladimir G. Bondaletov, Olga S. Korneva, Ivan A. Shulepov, Dmitrii A. Rusakov

Результат исследований: Материалы для журналаСтатьярецензирование

1 Цитирования (Scopus)

Аннотация

In this investigation the influence of test load and roughness of steel on the friction and wear beha-viour of polydicyclopentadiene (PDCPD) were studied. Friction and wear tests of PDCPD and R6M5 steel were carried out under dry friction and boundary lubrication on a pin-on-disc arran-gement. Tribological tests were performed at room temperature at different pressures (10 N and 18 N), the different roughness of steel (0.08 μm and 0.15 μm), sliding speed 0.5 m/s and sliding distance 3500 m. It is shown that under dry friction sliding, the wear increases with increasing pressure. In addition to this, decreasing of the roughness of steel from 0.15 μm to 0.08 μm reduces the wear intensity more than 2.0 times. It was found that in the presence of boundary lubrication friction coefficients are significantly reduced linearly with the decrease in viscosity of lubricants (polydimethylsiloxane fluids).

Язык оригиналаАнглийский
Страницы (с-по)556-560
Число страниц5
ЖурналPetroleum and Coal
Том58
Номер выпуска5
СостояниеОпубликовано - 2016

ASJC Scopus subject areas

  • Energy(all)

Fingerprint Подробные сведения о темах исследования «Friction and wear behavior of polydicyclopentadiene under dry sliding and boundary lubrication». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать