Forming Nanosecond Microwave Pulses by Transformation of Resonant Cavity Mode

Результат исследований: Материалы для журналаСтатья

2 Цитирования (Scopus)

Аннотация

The microwave pulse compression procedure consists of excitation of a working mode in a resonant cavity and transforming the mode into an auxiliary one that is coupled to an output line. Both transforming and coupling involve switching. Transients were calculated by recursion relations giving higher accuracy at short time constants. Demonstration experiments were run in the X-band. The compressor prototype showed power amplification of 15 dB at an output pulse width of 2.7 ns and a peak power of 1.5 MW. Mode transformation efficiency approached 0.7. A sequence of nanosecond and sub-nanosecond microwave pulses within the length of an input feeding pulse can be, in principle, obtained.

Язык оригиналаАнглийский
ЖурналIEEE Transactions on Microwave Theory and Techniques
DOI
СостояниеПринято/в печати - 20 апр 2016

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Condensed Matter Physics
  • Radiation

Fingerprint Подробные сведения о темах исследования «Forming Nanosecond Microwave Pulses by Transformation of Resonant Cavity Mode». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать