Forming Completely Penetrated Welded T-joints when Pulsed Arc Welding

N. Yu Krampit, Maxim Andreevich Krampit, A. S. Sapozhkov

Результат исследований: Материалы для журналаСтатья

Аннотация

The paper is focused on revealing the influence of welding parameters on weld formation when pulsed arc welding. As an experimental sample a T-joint over 10 mm was selected. Welding was carried out in flat position, which required no edge preparation but provided mono-directional guaranteed root penetration. The following parameters of welding were subjected to investigation: gap in the joint, wire feed rate and incline angles of the torch along and across the weld axis. Technological recommendations have been made with respect to pulsed arc welding; the cost price of product manufacturing can be reduced on their basis due to reduction of labor input required by machining, lowering consumption of welding materials and electric power.

Язык оригиналаАнглийский
Номер статьи012003
ЖурналIOP Conference Series: Materials Science and Engineering
Том125
Номер выпуска1
DOI
СостояниеОпубликовано - 5 мая 2016

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Fingerprint Подробные сведения о темах исследования «Forming Completely Penetrated Welded T-joints when Pulsed Arc Welding». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать