FORMATION OF THE SPARK CHANNEL AND CATHODE SPOT IN A PULSED VOLUME DISCHARGE.

R. B. Baksht, Yu D. Korolev, G. A. Mesyats

    Результат исследований: Материалы для книги/типы отчетовГлава

    3 Цитирования (Scopus)

    Аннотация

    This article reports a study of the transition of a volume discharge into a channel discharge carried out by the method of interrupted discharges along with spectroscopic mmeasurements. The discharge is excited in industrial-grade nitrogen at a pressure of 50-100 torr. The copper electrodes, 4 cm in diameter, have the Rogowski profile (the electrode separation is d equals 0. 8-1 cm). A voltage is applied to this gap from a generator through cables with a characteristic impedance of 75 OMEGA . This generator was able to produce single pulses with a height of 10-25 kV and a length of 30-60 nsec in an unmatched load.

    Язык оригиналаАнглийский
    Название основной публикацииSov J Plasma Phys
    Страницы369-371
    Число страниц3
    Том3
    Издание3
    СостояниеОпубликовано - мая 1977

    ASJC Scopus subject areas

    • Engineering(all)

    Fingerprint Подробные сведения о темах исследования «FORMATION OF THE SPARK CHANNEL AND CATHODE SPOT IN A PULSED VOLUME DISCHARGE.». Вместе они формируют уникальный семантический отпечаток (fingerprint).

    Цитировать