Formation of nanoscale carbon structures in the surface layer of metals under the impact of high intensity ion beam

Результат исследований: Материалы для журналаСтатья

14 Цитирования (Scopus)

Аннотация

This work represents the results of phase composition and the mechanical properties of tungsten and titanium after high-intensity pulsed ion beam (HPIB) treatment. It was shown that nanoscale carbide particles are formed under the HPIB influence in the surface layers of metals. Raising the pulse number results in increase of volume fraction of the carbide phases. The microhardness is 1.5-2 times more than the initial value and wear resistance of the metals improves in response to alloying of tungsten and titanium with carbon atoms accompanied by the formation of carbides.

Язык оригиналаАнглийский
Страницы (с-по)204-209
Число страниц6
ЖурналApplied Surface Science
Том310
DOI
СостояниеОпубликовано - 15 авг 2014

ASJC Scopus subject areas

  • Surfaces, Coatings and Films

Fingerprint Подробные сведения о темах исследования «Formation of nanoscale carbon structures in the surface layer of metals under the impact of high intensity ion beam». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать