Formation of high-carbon abrasion-resistant surface layers when high-energy heating by high-frequency currents

N. V. Plotnikova, V. Yu Skeeba, N. V. Martyushev, R. A. Miller, N. S. Rubtsova

Результат исследований: Материалы для журнала

13 Цитирования (Scopus)

Аннотация

The paper shows the possibility of carburization of low-carbon steel surface layers using high-frequency currents. The mathematical modeling of carburization using high-energy heating by high-frequency currents (HEH HFC) has been carried out, the temperature fields formed during the given processing have been calculated, as well as the structural changes in the surface layers have been simulated. The features of the structure formation in the surface layers of low-carbon steel after carburizing via HEH HFC have been determined by optical and scanning microscopy, which is confirmed by the computational models. The rational mode of fusion via HEH HFC has also been determined (power density of the source qs = (1.5 ... 4.0) • 108 W m-2, (the relative travel speed of parts Vp = 5 ... 100 mm / sec), with forming the compressive retained stresses in the surface layer (σRS ≈ -300 ... -400 MPa).

Язык оригиналаАнглийский
Номер статьи012022
ЖурналIOP Conference Series: Materials Science and Engineering
Том156
Номер выпуска1
DOI
СостояниеОпубликовано - 8 ноя 2016
СобытиеInternational Conference and Youth Scientific School on Materials and Technologies of New Generations in Modern Materials Science, MT 2016 - Tomsk, Российская Федерация
Продолжительность: 9 июн 201611 июн 2016

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Подробные сведения о темах исследования «Formation of high-carbon abrasion-resistant surface layers when high-energy heating by high-frequency currents». Вместе они формируют уникальный семантический отпечаток (fingerprint).

  • Цитировать