Fluxgate magnetometer for measuring ultra low magnetic induction

Результат исследований: Материалы для книги/типы отчетовМатериалы для конференции

3 Цитирования (Scopus)

Аннотация

The paper describes an experience in developing one-component magnetometer based on a miniature planar fluxgate sensor for measuring ultra low magnetic induction and operating at extremely low temperatures. A fluxgate magnetic sensor was fabricated in PCB technology with geometric dimensions 10×6×2 mm. The linearity error of the developed magnetometer is about 1.9 % of full scale and its maximum sensitivity is about 99 V/mT.

Язык оригиналаАнглийский
Название основной публикацииXXI IMEKO World Congress "Measurement in Research and Industry"
ИздательIMEKO-International Measurement Federation Secretariat
СостояниеОпубликовано - 2015
Событие21st IMEKO World Congress on Measurement in Research and Industry - Prague, Чешская Республика
Продолжительность: 30 авг 20154 сен 2015

Другое

Другое21st IMEKO World Congress on Measurement in Research and Industry
СтранаЧешская Республика
ГородPrague
Период30.8.154.9.15

    Fingerprint

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Цитировать

Baranova, V. E., Baranov, P. F., Muravyov, S. V., & Uchaykin, S. V. (2015). Fluxgate magnetometer for measuring ultra low magnetic induction. В XXI IMEKO World Congress "Measurement in Research and Industry" IMEKO-International Measurement Federation Secretariat.