Аннотация

A planar solid oxide fuel cell (SOFC) was fabricated using a commercial Ni/yttria-stabilized zirconia (YSZ) anode support, an YSZ/gadolinium-doped ceria (GDC) thin-film electrolyte, and a composite cathode of La0.6Sr0.4Co0.2Fe0.8O3/Gd0.1Ce0.9O1.95 (LSCF/GDC). A small, three-cell, SOFC stack is assembled using 10 cm10 cm single cells, metallic interconnects, and glassbased sealing. The stack performance was examined at various fuel flow rates of H2+N2 and air at a fixed temperature of 750°C. The three-cell stack with a crossflow design produced peak power density of 0.216 W/cm2 or about 39 W total power at 750°C.

Язык оригиналаАнглийский
Номер статьи044501
ЖурналJournal of Electrochemical Energy Conversion and Storage
Том15
Номер выпуска4
DOI
СостояниеОпубликовано - 1 ноя 2018

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Renewable Energy, Sustainability and the Environment
  • Energy Engineering and Power Technology
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Подробные сведения о темах исследования «Fabrication and performance investigation of three-cell SOFC stack based on anode-supported cells with magnetron sputtered electrolyte». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать